PIC16F1939-I/P Microchip Technology Inc., PIC16F1939-I/P Datasheet - Page 322

• Manufacturer Part Number: PIC16F1939-I/P
• Description: 28KB Flash, 1KB RAM, 256B EEPROM, LCD, 1.8-5.5V
• Manufacturer: Microchip Technology Inc.

Specifications of PIC16F1939-I/P

• A/d Inputs: 14-Channel, 10-Bit
• Comparators: 2
• Cpu Speed: 8 MIPS
• Eeprom Memory: 256 Bytes
• Input Output: 36
• Interface: I2C/SPI/UART/USART
• Memory Type: Flash
• Number Of Bits: 8
• Package Type: 40-pin PDIP
• Programmable Memory: 28K Bytes
• Ram Size: 1K Bytes
• Speed: 32 MHz
• Temperature Range: –40 to 125 °C
• Timers: 4-8-bit, 1-16-bit
• Voltage, Range: 1.8-5.5 V

PIC16F193X/LF193X
25.7.3
The frequency threshold should be placed midway
between the value of nominal frequency and the
reduced frequency of the capacitive sensing oscillator.
Refer to Application Note AN1103, “Software Handling
for Capacitive Sensing” (DS01103) for more detailed
information on the software required for capacitive
sensing module.
25.8
The capacitive sensing oscillator will continue to run as
long as the module is enabled, independent of the part
being in Sleep. In order for the software to determine if
a frequency change has occurred, the part must be
awake. However, the part does not have to be awake
when the timer resource is acquiring counts.
DS41364D-page 322
Note:
Note:
Operation during Sleep
• AN1101, “Introduction to Capacitive
• AN1102, “Layout and Physical Design
FREQUENCY THRESHOLD
For more information on general capacitive
sensing refer to Application Notes:
Timer0 does not operate when in Sleep,
and
capacitive sense measurements in Sleep.
Sensing” (DS01101)
Guidelines for Capacitive Sensing”
(DS01102)
therefore
cannot
be
used
Preliminary
for
 2009 Microchip Technology Inc.