SU2200RMXLTNET APC, SU2200RMXLTNET Datasheet - Page 23

• Manufacturer Part Number: SU2200RMXLTNET
• Description: UPS - Uninterruptible Power Supplies APC Smart-UPS XL 2200VA RM 5U 208V
• Manufacturer: APC

Specifications of SU2200RMXLTNET

• Power Rating: 1600 W
• Output Voltage Rating: 208 V
• Number Of Outlets: 5
• Interface Port: DB-9 RS-232, SmartSlot
• Runtime (full Load): 10 min
• Runtime (half Load): 34 min
• Topology: Online
• Tower / Rackmount: Rackmount
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

5.2.2 Verifying the Presence of Mounting Holes
1. Examine the rear plate inside the UPS. The configuration of the
5.2.3 Installing the Wire Harness Assembly
NOTE:
mounting holes should appear as in Figure 5-11. If the mounting
and ground screw holes are present in this configuration, proceed
with the installation procedure. If the holes are not present, you
will not be able to install the hardwire kit to this UPS. Contact
your dealer for an alternative solution.
A. Mount the wire harness as instructed (Section 5.2.3), and
B. Retrieve the old line cord and cut the last 6” from the end
If you are hard wiring the input only, choose one of the fol-
lowing two methods:
wire only the Input L1 and Input L2/N connections
or,
with the 4-wire connector attached. This connector and the
attached wires will be spliced to your input line. Using ap-
proved field-applied splicing devices, connect the two black
wires to Line1 (or Hot) of your input line and the two white
wires to Line2 (or Neutral) of your input line. Plug the con-
nector into the mating connector in the UPS (Figure 5-10)
and reinstall the input and output panels.
21