SLCF2GM2TU-S STEC, SLCF2GM2TU-S Datasheet - Page 54

• Manufacturer Part Number: SLCF2GM2TU-S
• Manufacturer: STEC

Specifications of SLCF2GM2TU-S

• Lead Free Status / Rohs Status: Compliant

SLCFxxxM2TU(I)(-x)
Datasheet
6.0 Registers
This chapter lists the registers of the CF Card. Refer to CompactFlash standards for further details.
6.1
In PC Card Mode, four configuration registers, as listed in Table 28, are used.
Note: In TrueIDE Mode, these registers cannot be used.
Configuration Option Register
Configuration and Status Register
Pin Replacement Register
Socket and Copy Register.
Configuration Registers
Configuration Register
Table 28: Configuration Registers
61000-07000-104, April 2011
This register is used to configure and observe the status of the CF
Card, and to issue soft resets to it. Also, the Index bits of this register
are used to select the PC Card mapping mode that the CF Card uses:
1) PC Card Memory, 2) PC Card Contiguous I/O, 3).PC Card Primary
I/O, and 4) PC Card Secondary I/O
This register is used for observing the CF Card state.
This register is used for providing the signal state of -IREQ when the
CF Card is configured in the PC Card I/O Mode.
This read/write register is used to identify the CF Card from other
devices. This register should be set by the host before this
Configuration Option register is set.
Description
CompactFlash Card
54