POWR1014A-B-EVN Lattice, POWR1014A-B-EVN Datasheet - Page 9

• Manufacturer Part Number: POWR1014A-B-EVN
• Description: BOARD BREAKOUT POWR1014A
• Manufacturer: Lattice
• Series: ispPAC®r

Specifications of POWR1014A-B-EVN

• Main Purpose: Power Management, Power Supply Supervisor/Tracker/Sequencer
• Embedded: No
• Utilized Ic / Part: ispPAC-POWR1014A
• Primary Attributes: 4x15 proto area, One 1x8 and Two 2x20 Expansion Headers
• Secondary Attributes: LED Status Indicators
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 220-1158

Lattice Semiconductor
To correct a USB driver installation:
1. Start ispVM and choose Options > Cable and I/O Port Setup.
2. Click the Troubleshooting the USB Driver Installation Guide link.
3. Follow the instructions in the guide to install the Lattice USB driver.
Determine the Source of a Pre-Programmed Device
You may receive your POWR1014A Breakout board after it has been reprogrammed by someone else. To restore
the board to the factory default, see the
and reprogramming the device.
You can also determine which demo design is currently programmed onto the board by comparing the JEDEC
checksums against of the programming file with what is read from the programmed device.
To compare JEDEC file checksum:
1. Connect the POWR1014A Breakout Board to a host PC using the USB port.
2. Start ispVM and choose ispTools > Scan.
3. Double-click the device row.
4. Click the Browse button.
5. Specify a new JEDEC Data File name and click the Save button.
6. From the Operation list choose Read and Save JEDEC and click OK.
7. Choose Project > Download.
Ordering Information
Technical Support Assistance
Hotline: 1-800-LATTICE (North America)
e-mail:
Internet:
POWR1014A Breakout Board Evaluation Kit
The Cable and I/O Port Setup Dialog appears.
The Troubleshooting the USB Driver Installation Guide document appears in your system’s PDF file reader.
The device appears in the Device List.
The Device Information dialog appears.
The Save as Data File dialog appears.
ispVM reads the contents from the device and writes the results to the JEDEC file specified.
Open the JEDEC file into a text editor and page to the bottom of the file.
Note the hexadecimal checksum at the line above the User Electronic Data note line. Compare this value
against the checksum of the original JEDEC demo programming files.
[phone] (Outside North America)
[e-mail]
www.latticesemi.com
Description
Download Demo or Create New Designs
POWR1014A-B-EVN
Ordering Part Number
9
POWR1014A Breakout Board
Evaluation Kit User’s Guide
China RoHS Environment-Friendly
section for details on downloading
Use Period (EFUP)