SNAP-TEX-REC10N OPTO 22, SNAP-TEX-REC10N Datasheet - Page 3

• Manufacturer Part Number: SNAP-TEX-REC10N
• Description: 40T0078
• Manufacturer: OPTO 22

Specifications of SNAP-TEX-REC10N

• Accessory Type: Narrow End Cap

SNAP TEX Mounting/Wiring Tools and Spare Parts
Installing SNAP-Rack DIN-Rail Clips
1. (This step only for racks with three or more clips.) Slide one DIN
2. Insert one edge of the circuit board into the extrusion.
3. Push down hard on the other edge to snap the board into
4. Attach one DIN clip to each end cap using the slots in the end
5. Using the screws provided, secure an end cap and DIN clip
Attaching the Adapter Clip to a DIN Rail
1. Hook the DIN-rail clip over the top of the DIN rail.
2. Using a screwdriver, pry open the DIN-rail clip flange at the bot-
3. Snap the DIN-rail clip into place.
To remove: Use a screwdriver to pry open the DIN-rail clip flange.
© 2008–2010 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.
1
clip to the middle position and secure with the rivet provided.
For racks with four clips, add an additional middle clip.
place.
caps as shown.
assembly to each end of the extrusion.
tom of the DIN-rail clip and push the clip towards the DIN rail.
SALES 800-321-6786 • 951-695-3000 • FAX [phone] • [e-mail] • SUPPORT 800-835-6786 • 951-695-3080 • FAX [phone] • [e-mail]
4
1
Extrusion
assembly
DIN rail
2
Rivet
5
2
3
3
Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com
Installing SNAP-PSDIN Adapters
1. Remove the four screws that fasten the panel mounting base
2. Remove the panel mounting base plate making sure to save the
3. Using the two flat-head screws included with the kit, assemble
4. Using the four screws removed in step 1, fasten the DIN-rail
5. Mount the power supply on the DIN rail next to the rack or con-
plate to the power supply.
screws.
the SNAP-PSDIN-RAIL adapter as shown.
adapter to the power supply.
troller it will power.
NOTE: The SNAP-PS5-
24DC power supply is
shown. Other power
supplies have similar
base plates.
PAGE
3