SNAP-TEX-REC10N OPTO 22, SNAP-TEX-REC10N Datasheet - Page 5

• Manufacturer Part Number: SNAP-TEX-REC10N
• Description: 40T0078
• Manufacturer: OPTO 22

Specifications of SNAP-TEX-REC10N

• Accessory Type: Narrow End Cap

SNAP TEX Mounting/Wiring Tools and Spare Parts
Other Mounting Accessories
SNAP I/O Module Removal Tool
The SNAP-MODTOOL, included with each I/O mounting rack, is
used to remove a SNAP I/O module from the rack. If you need extra
tools, order this pack of 25.
To remove a module:
1. If the modules are held in place with screws, remove them.
2. Holding the SNAP module tool (provided) as shown in the illus-
3. Squeeze the module tool against the module to open the
© 2008–2010 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.
tration below, insert it into the notch at the base of the module.
release latch, and pull straight up on the module to remove it.
SALES 800-321-6786 • 951-695-3000 • FAX [phone] • [e-mail] • SUPPORT 800-835-6786 • 951-695-3080 • FAX [phone] • [e-mail]
Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com
Rack Adapters for Mixing Legacy and Current
Brains and Racks
While it’s always best to use brains and racks designed to work
together, sometimes mixing them is temporarily necessary. Two
rack adapters are available:
•
•
Please note that the adapter does not change the functionality or
limitations of the older products. For example, when used with a
newer brain or controller, a SNAP B-series rack is still limited to
digital modules in the first eight slots only.
For additional information, see form #1688, SNAP PAC System
Migration Technical Note and form #1693, Current and Legacy
Product Compatibility Charts.
SNAP-RCK-B2M allows a legacy SNAP brain such as a SNAP-
B3000-ENET (blue connector) to be used on a SNAP PAC rack or
a SNAP M-series rack (black connector).
SNAP-RCK-M2B allows a newer SNAP PAC brain or rack-
mounted controller, such as a SNAP-PAC-EB2 or a SNAP-PAC-
R1 (black connector), to be used on an older SNAP B-series rack
(blue connector).
PAGE
5