030-2416-001 ITT Cannon, LLC, 030-2416-001 Datasheet - Page 44

• Manufacturer Part Number: 030-2416-001
• Description: DL CONT CRIMP 28-32 20AU
• Manufacturer: ITT Cannon, LLC
• Series: DLr
• Type: Signalr

Specifications of 030-2416-001

• Pin Or Socket: Non-Gendered
• Contact Termination: Crimp
• Wire Gauge: 28-32 AWG
• Contact Finish: Gold
• Contact Finish Thickness: 20µin (0.51µm)
• Current Rating: -
• Lead Free Status / Rohs Status: Contains lead / RoHS non-compliant
• For Use With: 1003-1679 - DLM 156C SHILDED PLUG1003-1680 - DLM 96C SHIELDED PLUG1003-1681 - DLM 96C SHIELDED RECPT
• Other names: 030-2416-001; 302416001; I030-2416-001; I030-2416-001

their exacting needs. The accessories range from
the simple actuating handle to junction and
backshells, as well as polarizing posts and
protective covers for the contacts.
Actuating handles are the same for the DL1/2/3
and DLM1/2/3 series. The DL5/DLM5 and DLM6
series have specific handles. Handles are sold
separately since many applications require the
connector to be attached or removed only by an
authorized technician.
Plastic junction shells are available for the
DL1/2/3 series for encasement of the crimp
contacts after complete installation into the
connector. These shells also make it possible for
the DL to be used as a cable-to-cable mating
connector as they can be used both on the plug
and the receptacle. The DL1/2/3 plastic junction
shells have optional secondary cable entry
capability by removing the molded in cable entry
plugs. Cable clamp kits are available to affix the
cable to the second entry. This second entry option
is very useful in applications where the large wire
sizes make the cable diameter too large to be
handled from a single entry port.
Metal Backshells are available for the entire
DL/DLM series. The metal backshells are
constructed from die cast aluminum with a nickel
plating to facilitate in EMI/RFI shielding of the
connector system. Shielding has become a driving
force because of ever increasing stringent EMI/RFI
regulations.
ZIF Connectors
Accessories
C
Accessories Selection Guide
–Not Compatible
Compatible
DL1-156
DL2-96
DL3-60
DL4-624
DL4-1248
DL4-2496
DL5-260
DLM1-156
DLM2-96
DLM3-60
DLM5-260
DLM6-360
DLD1-156
DLD2-96
Connector
Series
engineers to configure the product for
accessories that allow the design
annon offers a wide selection of
see page 47
Actuating
Handles
–
–
–
–
–
see page 47
Rubber
–
–
–
–
–
Protective
Covers
Polarizing posts are available to offer a keying
feature for both the DL and DLM connectors. The
polarizing posts can be installed in specific
orientation so that plugs of the same size
connectors can only be mated in predetermined
receptacles. This feature offers the designer the
ability to fool-proof the attachment possibilities to
protect accidental damage to the system.
see page 47
Plastic
–
–
–
–
–
–
–
–
see page 49
Metal Shell
Shielding
EMI/RFI
–
–
–
–
–
–
–
–
–
–
–
–
–
see page 46
Junction
Plastic
Shell
–
–
–
–
–
–
–
–
Protective covers of plastic and anti-static rubber
are available to offer contact protection from
physical damage or dust. Since the DL series has a
high density of contacts in an exposed area, these
covers are very useful for many applications. For
example: where systems have multiple
connectors; when the connections are often left
unattached; or when the system parts are put into
storage.
see page 46
Clamps
Cable
–
–
–
–
–
–
–
–
see pages 44-45
Backshell
Metal
Dimensions are shown in mm (inch)
–
–
–
–
–
Accessories
Dimensions subject to change
see page 48
Polarizing
Posts
–
–
–
–
–
43