V375A5C400B Vicor Corporation, V375A5C400B Datasheet - Page 12

• Manufacturer Part Number: V375A5C400B
• Manufacturer: Vicor Corporation

Vicor Corp. Tel: [phone] Fax: [phone]
Figure 11 — N+1 module array output connections.
* Pin style designator follows the “B” after the output power and precedes the baseplate designator.
Ex. V375A12T600BN2 — Long ModuMate Pins
Module 1
Module 2
Module N+1
(None)
S
N
G
L
F
+OUT
–OUT
+OUT
–OUT
+OUT
–OUT
SC
SC
SC
+S
–S
+S
–S
+S
–S
+S
–S
+S
–S
Short Tin/Lead
Long Tin/Lead
Short ModuMate
Long ModuMate
Short RoHS
Long RoHS
Load
–S
+S
Set your site on VICOR at vicorpower.com
• The +Out and –Out power buses should be
• The +Sense pins should be tied to the same
• At the discretion of the power system designer,
• ORʼing diodes may be inserted in series with
designed to minimize and balance parasitic
impedance from each module output to the load.
point on the +Out power bus; the –Sense pins
should be tied to the same point on the –Out
power bus.
a subset of all modules within an array may be
configured as slaves by shorting SC to –S.
the +Out pins of each module to provide module
output fault tolerance.
Requires in-board, mounting
On-board mounting for 0.065" boards
SurfMate or in-board socket mounting
On-board socket mounting
Select for RoHS compliant on-board solder or socket mounting
Select for RoHS compliant in-board solder, socket, or SurfMate mounting
375V Maxi Family
Figure 12 — OR’ing diodes connections.
+OUT
–OUT
SC
+S
–S
Rev. 8.4
other modules
+Sense from
in the array
Page 12 of 14