AD795 Analog Devices, AD795 Datasheet - Page 11

• Manufacturer Part Number: AD795
• Description: Low Power, Low Noise Precision FET Op Amp
• Manufacturer: Analog Devices

Specifications of AD795

• -3db Bandwidth: 1.6MHz
• Slew Rate: 1V/µs
• Vos: 100µV
• Ib: 1pA
• # Opamps Per Pkg: 1
• Input Noise (nv/rthz): 9nV/rtHz
• Vcc-vee: 8V to 36V
• Isy Per Amplifier: 1.5mA
• Packages: SOIC

MINIMIZING INPUT CURRENT
The AD795 is guaranteed to 1 pA maximum input current
with ±15 V supply voltage at room temperature. Careful atten-
tion to how the amplifier is used is necessary to maintain this
performance.
The amplifier’s operating temperature should be kept as low as
possible. Like other JFET input amplifiers, the AD795’s input
current doubles for every 10°C rise in junction temperature
Rev. C | Page 11 of 20
(illustrated in Figure 9). On-chip power dissipation raises the
device operating temperature, causing an increase in input
current. Reducing supply voltage to cut power dissipation
reduces the AD795’s input current (see Figure 7). Heavy output
loads can also increase junction temperature; maintaining a
minimum load resistance of 10 kΩ is recommended.
AD795