TB6596FLG Toshiba, TB6596FLG Datasheet - Page 17

• Manufacturer Part Number: TB6596FLG
• Manufacturer: Toshiba

Specifications of TB6596FLG

• Function: Driver
• Vopmax (vm*): 5.5V (6V)
• Io (lpeak): 0.6A (0.8A)
• Channel: 6-ch
• I/f: serial input
• Option: Const current x2
• Package: QON36
• Rohs Compatible†: yes

Notes on Contents
IC Usage Considerations
1. Block Diagrams
2. Equivalent Circuits
3. Timing Charts
4. Application Circuits
5. Test Circuits
Notes on Handling of ICs
Some of the functional blocks, circuits, or constants in the block diagram may be omitted or simplified for
explanatory purposes.
The equivalent circuit diagrams may be simplified or some parts of them may be omitted for explanatory
purposes.
Timing charts may be simplified for explanatory purposes.
The application circuits shown in this document are provided for reference purposes only. Thorough
evaluation is required, especially at the mass production design stage.
Toshiba does not grant any license to any industrial property rights by providing these examples of
application circuits.
Components in the test circuits are used only to obtain and confirm the device characteristics. These
components and circuits are not guaranteed to prevent malfunction or failure from occurring in the
application equipment.
(1)
(2)
(3)
(4)
The absolute maximum ratings of a semiconductor device are a set of ratings that must not be
exceeded, even for a moment. Do not exceed any of these ratings.
Exceeding the rating(s) may cause the device breakdown, damage or deterioration, and may result
injury by explosion or combustion.
Use an appropriate power supply fuse to ensure that a large current does not continuously flow in case
of over current and/or IC failure. The IC will fully break down when used under conditions that exceed
its absolute maximum ratings, when the wiring is routed improperly or when an abnormal pulse noise
occurs from the wiring or load, causing a large current to continuously flow and the breakdown can
lead smoke or ignition. To minimize the effects of the flow of a large current in case of breakdown,
appropriate settings, such as fuse capacity, fusing time and insertion circuit location, are required.
If your design includes an inductive load such as a motor coil, incorporate a protection circuit into the
design to prevent device malfunction or breakdown caused by the current resulting from the inrush
current at power ON or the negative current resulting from the back electromotive force at power OFF.
IC breakdown may cause injury, smoke or ignition.
Use a stable power supply with ICs with built-in protection functions. If the power supply is unstable,
the protection function may not operate, causing IC breakdown. IC breakdown may cause injury,
smoke or ignition.
Do not insert devices in the wrong orientation or incorrectly.
Make sure that the positive and negative terminals of power supplies are connected properly.
Otherwise, the current or power consumption may exceed the absolute maximum rating, and
exceeding the rating(s) may cause the device breakdown, damage or deterioration, and may result
injury by explosion or combustion.
In addition, do not use any device that is applied the current with inserting in the wrong orientation or
incorrectly even just one time.
17
TB6596FLG
2008-01-29