TLE 8386-2EL Infineon Technologies, TLE 8386-2EL Datasheet - Page 16

• Manufacturer Part Number: TLE 8386-2EL
• Manufacturer: Infineon Technologies

Specifications of TLE 8386-2EL

• Packages: PG-SSOP-14
• Comment: LS-sense-booster (prefered as voltage source);Can be used in SEPIC- or FLYBACK-configuration as wellMax. output current dependent on output voltage.
• Vq (max): adj (max 9-times of VS)
• Iq (max): -
• Iq (typ): 7,000.0 µA
• Output: Boost Converter

7
7.1
The enable function powers on or off the device. A valid logic low signal on enable pin EN powers off the device
and current consumption is less than 2 µA. A valid logic high enable signal on enable pin EN powers on the device.
The Enable Startup Time
starts to switch. During this period of time the internal supplies, bandgap are initalized and reach their nominal
values. The TLE8386-2 will start to switch after the nominal values are reached.
Figure 6
Data Sheet
Enable Function
Description
Timing Diagram Enable
t
EN,START
is the time between the Enable signal is recognized as valid and the device
14
Rev. 1.0, 2010-10-25
Enable Function
TLE8386-2EL