S1D12200 Epson Electronics America, Inc., S1D12200 Datasheet - Page 185

no-image

S1D12200

Manufacturer Part Number
S1D12200
Description
S1d12000 Series Lcd Driver Ic Technical Manual Technical Manual
Manufacturer
Epson Electronics America, Inc.
Datasheet
S1D12304/12305 Series
15. INSTRUCTION SETUP EXAMPLE (REFERENCE)
(1)
Note 1: Commands (6) and (7) initialize the RAM. The display contents must first be set. The non-display area
5–36
Initial setup
Command status
• Static display control : Off
• Display on/off control : Off
• Power save
• Power control
• System reset
• Others are undefined.
Command input: (Asterisk indicates any
command sequence.)
(1) System setup command
(*) Static display control command
(*) Display on/off control command
(*) Electronic volume register setup
(*) Power save command
(6) RAM address setup
(7) Data writing
Command input
(8) Power control commands
Command input:
(9) Electronic volume register setup
(Valid in Standby mode only)
• D: On (Display)
• Data: (0, 0, 0, 0)
• PS: Off (Power save)
• O: On (Oscillation)
• P, VF, VC: On
• Data: Appropriate value
must satisfy the following conditions (for RAM clear).
• DDRAM: Write the 20H data (character code).
• CGRAM: Write the 00H data (null data).
• Symbol register: Write the 00H data (null data).
As the RAM data is unstable during reset signal input (after power-on), null data must be written. If not,
unexpected display may result.
Waiting for 20 msec or more
Waiting for 10 sec or more
Input of reset signal
V
End of initialization
Power regulation
DD
-V
SS
power ON
: Off
: Off
: CG=0
(Note 1)
(Note 1)
EPSON
(2) Display mode
Input of RAM address setup command
Input of RAM (data) write command
Display of written data
End of initialization
Rev. 2.4

Related parts for S1D12200