IR3081 International Rectifier Corp., IR3081 Datasheet - Page 35

• Manufacturer Part Number: IR3081
• Description: Xphasetm Vr 10 Control Ic
• Manufacturer: International Rectifier Corp.

PCB Metal and Component Placement
• Lead land width should be equal to nominal part lead width. The minimum lead to lead spacing should
• Lead land length should be equal to maximum part lead length + 0.2 mm outboard extension + 0.05mm
• Center pad land length and width should be equal to maximum part pad length and width. However, the
• A single 0.30mm diameter via shall be placed in the center of the pad land and connected to ground to
Page 35 of 39
be ≥ 0.2mm to minimize shorting.
inboard extension. The outboard extension ensures a large and inspectable toe fillet, and the inboard
extension will accommodate any part misalignment and ensure a fillet.
minimum metal to metal spacing should be ≥ 0.17mm for 2 oz. Copper (≥ 0.1mm for 1 oz. Copper and ≥
0.23mm for 3 oz. Copper)
minimize the noise effect on the IC.
10/01
IR3081
/04