NJU6624C New Japan Radio, NJU6624C Datasheet - Page 8

• Manufacturer Part Number: NJU6624C
• Description: 14-CHARACTER 1-LINE DOT MATRIX LCD CONTROLLER DRIVER with SMOOTH SCROLL FUNCTION
• Manufacturer: New Japan Radio

(1-9)Keyscan circuit
(1-9)Keyscan circuit
The Keyscan circuit consists of a detector block of key pressing and a fetching block of key status. It scans 4x8
The Keyscan circuit consists of a detector block of key pressing and a fetching block of key status. It scans 4x8
key matrix and fetches conditions of 32 keys. Furthermore, it operates correctly against the key roll over input.
key matrix and fetches conditions of 32 keys. Furthermore, it operates correctly against the key roll over input.
-Request signal output
-Request signal output
When the NJU6624C detect the key pressing by the key scan circuit, it outputs “H” signal as the request signal
When the NJU6624C detect the key pressing by the key scan circuit, it outputs “H” signal as the request signal
from the “REQ” terminal to notice the key pressing information to an application system.
from the “REQ” terminal to notice the key pressing information to an application system.
-Contents of key register renewal
-Contents of key register renewal
Contents of key register are “0000 0000” in case of no key operation. Contents of key register are not changed in
Contents of key register are “0000 0000” in case of no key operation. Contents of key register are not changed in
busy of key data reading operation. Key data is fetched into the key register after 2 clock of the end of a keyscan
busy of key data reading operation. Key data is fetched into the key register after 2 clock of the end of a keyscan
cycle and kept by the start of next cycle.
cycle and kept by the start of next cycle.
-Key data input terminal and segment terminal
-Key data input terminal and segment terminal
Keyscan signal output terminals operate as segment terminals (SEG1 to SEG8) also and keyscan signals are
Keyscan signal output terminals operate as segment terminals (SEG1 to SEG8) also and keyscan signals are
output in interval period of segment signals. Key data input terminals (K0 to K3) are pulled up to VDD in busy of
output in interval period of segment signals. Key data input terminals (K0 to K3) are pulled up to VDD in busy of
keyscan operation (tKS). In this period, terminals of SEG9 to SEG70 output the voltage of V2 or V
keyscan operation (tKS). In this period, terminals of SEG9 to SEG70 output the voltage of V2 or V
-Keyscan OFF mode
-Keyscan OFF mode
Keyscan operation is turned ON or OFF by the instruction. In case of keyscan OFF, the detector of key pressing
Keyscan operation is turned ON or OFF by the instruction. In case of keyscan OFF, the detector of key pressing
is not operating and key data input terminals (K0 to K3) are not pulled up during the period of keyscan (tKS). In
is not operating and key data input terminals (K0 to K3) are not pulled up during the period of keyscan (tKS). In
the period of keyscan (tKS), all of segment terminals (SEG1 to SEG70) output the voltage of V2 or V
the period of keyscan (tKS), all of segment terminals (SEG1 to SEG70) output the voltage of V2 or V
-Example Keyscan
-Example Keyscan
SEG1/S0
SEG1/S0
SEG2/S1
SEG2/S1
SEG3/S2
SEG3/S2
SEG4/S3
SEG4/S3
SEG5/S4
SEG5/S4
SEG6/S5
SEG6/S5
SEG7/S6
SEG7/S6
SEG8/S7
SEG8/S7
REQ
REQ
S 0
S 1
S 2
S 3
S 4
S 5
S 6
S 7
tKS
tKS
S 0
S 1
S 2
S 3
S 4
S 5
S 6
S 7
NJU6624C
NJU6624C
S 0
S 1
S 2
S 3
S 4
S 5
S 6
S 7
LCD2
LCD2
LCD2.
LCD2.
. .