T140VN01 AU_OPTRONICS, T140VN01 Datasheet - Page 26

• Manufacturer Part Number: T140VN01
• Description: COLOR TFT LCD MODULE
• Manufacturer: AU_OPTRONICS

PDF created with FinePrint pdfFactory Pro trial version
©Copyright AU Optronics, Inc.
January, 2003 All Rights Reserved.
No Reproduction and Redistribution Allowed.
(5) When fixed patterns are displayed for a long time, remnant image is likely to occur.
(6) Module has high frequency circuits. Sufficient suppression to the electromagnetic interference
9-3 ELECTROSTATIC DISCHARGE CONTROL
Since a module is composed of electronic circuits, it is not strong to electrostatic discharge. Make
certain that treatment persons are connected to ground through wrist band etc. And don’t touch
interface pin directly.
9-4 PRECAUTIONS FOR STRONG LIGHT EXPOSURE
Strong light exposure causes degradation of polarizer and color filter.
9-5 STORAGE
When storing modules as spares for a long time, the following precautions are necessary.
(1) Store them in a dark place. Do not expose the module to sunlight or fluorescent light. Keep the
(2) The polarizer surface should not come in contact with any other object. It is recommended that
9-6 HANDLING PRECAUTIONS FOR PROTECTION FILM
(1) The protection film is attached to the bezel with a small masking tape. When the protection film
(2) When the module with protection film attached is stored for a long time, sometimes there
(3) You can remove the glue easily. When the glue remains on the Bezel or its vestige is
shall be done by system manufacturers. Grounding and shielding methods may be important
to minimize the interface.
temperature between 5℃ and 35℃ at normal humidity.
they be stored in the container in which they were shipped.
is peeled off, static electricity is generated between the film and polarizer. This should be
peeled off slowly and carefully by people who are electrically grounded and with well ion-blown
equipment or in such a condition, etc.
remains a very small amount of flue still on the Bezel after the protection film is peeled off.
recognized, please wipe them off with absorbent cotton waste or other soft material like
chamois soaked with normal-hexane.
http://www.fineprint.com
T140VN01 Ver.0.1
25/24