NE5500179A NEC, NE5500179A Datasheet - Page 9

• Manufacturer Part Number: NE5500179A
• Description: SILICON POWER MOS FET
• Manufacturer: NEC

!
RECOMMENDED SOLDERING CONDITIONS
methods and conditions other than those recommended below, contact your nearby sales office.
Infrared Reflow
VPS
Wave Soldering
Partial Heating
Caution Do not use different soldering methods together (except for partial heating).
This product should be soldered and mounted under the following recommended conditions.
Soldering Method
Peak temperature (package surface temperature)
Time at peak temperature
Time at temperature of 220 C or higher
Preheating time at 120 to 180 C
Maximum number of reflow processes
Maximum chlorine content of rosin flux (% mass)
Peak temperature (package surface temperature)
Time at temperature of 200 C or higher
Preheating time at 120 to 150 C
Maximum number of reflow processes
Maximum chlorine content of rosin flux (% mass)
Time at peak temperature
Preheating temperature (package surface temperature) : 120 C or below
Maximum number of flow processes
Maximum chlorine content of rosin flux (% mass)
Peak temperature (pin temperature)
Soldering time (per pin of device)
Maximum chlorine content of rosin flux (% mass)
Peak temperature (molten solder temperature)
Data Sheet PU10118EJ01V1DS
Soldering Conditions
: 260 C or below
: 10 seconds or less
: 60 seconds or less
: 120 30 seconds
: 3 times
: 0.2%(Wt.) or below
: 215 C or below
: 25 to 40 seconds
: 30 to 60 seconds
: 3 times
: 0.2%(Wt.) or below
: 260 C or below
: 10 seconds or less
: 1 time
: 0.2%(Wt.) or below
: 350 C or below
: 3 seconds or less
: 0.2%(Wt.) or below
Condition Symbol
NE5500179A
HS350-P3
WS260
VP215
For soldering
IR260
9