S29AL004D SPANSION, S29AL004D Datasheet - Page 34

• Manufacturer Part Number: S29AL004D
• Description: 4 Megabit (512 Kx 8-Bit/256 K x 16-Bit) CMOS 3.0 Volt-only Boot Sector Flash Memory
• Manufacturer: SPANSION

Absolute Maximum Ratings
Notes:
1. Minimum DC voltage on input or I/O pins is –0.5 V. During voltage transitions, input or I/O pins may undershoot V
2. Minimum DC input voltage on pins A9, OE#, and RESET# is –0.5 V. During voltage transitions, A9, OE#, and
3. No more than one output may be shorted to ground at a time. Duration of the short circuit should not be greater
Stresses above those listed under
is a stress rating only; functional operation of the device at these or any other conditions above those indicated in the
operational sections of this data sheet is not implied. Exposure of the device to absolute maximum rating conditions for
extended periods may affect device reliability.
Operating Ranges
Operating ranges define those limits between which the functionality of the device is guaranteed
32
to –2.0 V for periods of up to 20 ns. See
V. During voltage transitions, input or I/O pins may overshoot to V
on page
RESET# may undershoot V
voltage on pin A9 is +12.5 V which may overshoot to 14.0 V for periods up to 20 ns.
than one second.
33.
Storage Temperature Plastic Packages . . . . . . . . . . . . . . . . .–65°C to +150°C
Ambient Temperature with Power Applied . . . . . . . . . . . . . . . –65°C to +85°C
Voltage with Respect to Ground V
A9, OE#, and RESET# (Note 2) . . . . . . . . . . . . . . . . . . . . . –0.5 V to +12.5 V
All other pins (Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . –0.5 V to V
Output Short Circuit Current (Note 3). . . . . . . . . . . . . . . . . . . . . . . . 200 mA
Industrial (I) Devices
Ambient Temperature (T
V
V
CC
CC
for full voltage range . . . . . . . . . . . . . . . . . . . . . . . . . +2.7 V to +3.6 V
Supply Voltages
SS
Absolute Maximum Ratings‚ on page 32
to –2.0 V for periods of up to 20 ns. See
A
Figure 7, on page
) . . . . . . . . . . . . . . . . . . . . . . . . . –40°C to +85°C
A d v a n c e
CC
S29AL004D
(Note 1) . . . . . . . . . . . .–0.5 V to +4.0 V
33. Maximum DC voltage on input or I/O pins is V
I n f o r m a t i o n
CC
may cause permanent damage to the device. This
+2.0 V for periods up to 20 ns. See
Figure 7, on page
CC
S29AL004D_00_A1 February 18, 2005
33. Maximum DC input
+0.5 V
Figure 8,
CC
+0.5
SS