v600-hs62 Omron Corporation, v600-hs62 Datasheet - Page 7

• Manufacturer Part Number: v600-hs62
• Description: Rfid System Conforms To Semi Standard, Electromagnetic Inductive 134 Khz
• Manufacturer: Omron Corporation

Functional Specifications
Serial Type System Configuration Examples
System Configuration Using CIDRW Controller (V700-L22)
The Carrier ID Reader Writer (CIDRW) System is an RFID system that conforms to SEMI standards. The V700-L22 CIDRW Controller, the V640-
HAM1@ Amplifier Unit, the V640-HS6@ CIDRW Head, and a Texas Instruments ID Tag can be used to configure a Carrier ID Reader Writer
(CIDRW) System that conforms to the following standards:
Note: SEMI: Semiconductor Equipment and Materials International
CIDRW System
Ethernet Type System Configuration Examples
Note: If the IP address is set on the DIP switch, it will be in the form 192.168.1.@@@. The subnet mask is always 255.255.255.0.
SECS: SEMI Equipment Communications Standard
The IP address of the Amplifier Unit can be either set on this DIP switch or the desired IP address can be set in ROM. If pins 1 to 5 on the
DIP switch are all turned OFF, the IP address that is set in ROM will be used.
Host computer,
device controller, etc.
Host device
RS-232C
SECS I/II
LAN cable
Ethernet HUB
RS-232C
LAN cable
LAN cable
LAN cable
Link Unit
V700-L11
50 m max.
The Amplifier Unit controls the
CIDRW Head.
Amplifier Unit
V640-HAM11-ETN
Amplifier Unit
V640-HAM11-ETN
Amplifier Unit
V640-HAM11-ETN
Up to 31 Units can be connected.
Just the relevant Amplifier Unit can be
removed and replaced while the power
remains on.
RS-485
The CIDRW Head is the
antenna. It reads and writes
carrier IDs and performs
other processing for ID Tags.
CIDRW Head
V640-HS61
CIDRW Head
V640-HS61
CIDRW Head
V640-HS61
V640 Series
7