v600-hs62 Omron Corporation, v600-hs62 Datasheet - Page 9

no-image

v600-hs62

Manufacturer Part Number
v600-hs62
Description
Rfid System Conforms To Semi Standard, Electromagnetic Inductive 134 Khz
Manufacturer
Omron Corporation
Datasheet
About mounting
Screw Locking Adhesive
Communications with the Host Device
(V640-HAM11-V3/V640-HAM11-L Only)
Startup Precaution
Application Precaution
(V640-HAM11-ETN/V640-HAM11-L-ETN Only)
• This product communicates with ID Tags using the 134 kHZ
• In order to minimize the effects of noise, ground nearby metal
• When mounting CIDRW Heads, tighten the screws tightly.
• When multiple CIDRW Heads are mounted next to each other,
• Screw locking adhesive (screw lock) may cause deterioration and
• Communicate with the host device only after confirming that the
• Never turn OFF the power supply while the CIDRW Controller is
• Never turn OFF the power supply while setting the IP address,
frequency band. Some transceivers, motors, monitoring
equipment, and power supplies (power supply ICs) generate
electrical waves (noise) that interfere with communications with ID
Tags, If you are using the product in the vicinity of any of these
devices, check the effect on communications in advance.
bodies with a grounding resistance not exceeding 100 ohms.
(Recommended 0.6N·m)
communications performance could be impaired by mutual
interference. Read and follow the information in User's Manual on
mutual interference when installing multiple heads.
cracking of resin parts; do not use it for screws in resin parts or
anywhere where resin washers are used.
CIDRW Controller has started. Also, unstable signals may occur at
the host interface when the CIDRW Controller is started. When
initializing operation, clear the reception buffer at the host device
or take other suitable methods to clear unwanted signals.
starting, including when power is turned ON, when the mode is
changed, or when the CIDRW Controller is being reset. Doing so
may damage the CIDRW Controller.
subnet mask, or Web password. Doing so may damage the
Amplifier Unit.
V640 Series
9

Related parts for v600-hs62