m29dw128f-70za6t Numonyx, m29dw128f-70za6t Datasheet - Page 17

• Manufacturer Part Number: m29dw128f-70za6t
• Description: 128 Mbit 16mb X8 Or 8mb X16, Multiple Bank, Page, Boot Block 3v Supply Flash Memory
• Manufacturer: Numonyx

M29DW128F
2.12
2.13
V
V
The Command Interface is disabled when the V
Voltage, V
during power up, power down and power surges. If the Program/Erase Controller is
programming or erasing during this time then the operation aborts and the memory contents
being altered will be invalid.
A 0.1µF capacitor should be connected between the V
Ground pin to decouple the current surges from the power supply. The PCB track widths
must be sufficient to carry the currents required during Program and erase operations, I
V
V
which must be connected to the system ground.
CC
SS
CC
SS
is the reference for all voltage measurements. The device features two V
provides the power supply for all operations (Read, Program and Erase).
Ground
supply voltage (2.7V to 3.6V)
LKO
. This prevents Bus Write operations from accidentally damaging the data
CC
Supply Voltage is less than the Lockout
CC
Supply Voltage pin and the V
Signal descriptions
SS
pins both of
17/94
SS
CC2
.