wm2002 Wolfson Microelectronics plc, wm2002 Datasheet

no-image

wm2002

Manufacturer Part Number
wm2002
Description
Stereo Headphone Driver With Wolfson Myzonetm Ambient Noise Cancellation
Manufacturer
Wolfson Microelectronics plc
Datasheet
w
DESCRIPTION
The WM2002 is a low power, high quality stereo headphone
driver, delivering Wolfson’s patented myZone
cancellation in a single-ended or BTL (bridge-tied-load) output
configuration. The WM2002 supports analogue playback or
voice input, and analogue or digital microphone inputs for noise-
monitoring microphones.
Designed for embedded applications or incorporated within a
stand-alone headset or headphone, the Wolfson myZone™
ANC noise cancellation engine performs ambient noise
cancellation during a voice call or during music playback.
The ambient noise input is supported via single-ended or
differential analogue microphone interfaces; digital microphone
input is also supported. Up to 10 noise input microphones can
be supported at once.
The
comprising a DC-DC converter, Charge Pump and LDO
Regulators. Many different power supply configurations are thus
supported. The entire device can be powered from a single cell
AAA battery, or from 2xAAA cells, or from an external regulated
supply.
System clocking is achieved using an on-chip oscillator. An
external clock can be connected directly, if available.
The WM2002 is configured using programmable settings stored
in an integrated non-volatile memory. The configuration stored
in the OTP memory is enabled automatically at start-up. If
required, the WM2002 can also be configured using register
control accessed using a 2-wire serial control interface.
WOLFSON MICROELECTRONICS plc
To receive regular email updates, sign up
WM2002
Stereo Headphone Driver with Wolfson myZone
provides
integrated
at
Ambient Noise Cancellation
http://www.wolfsonmicro.com/enews
power
TM
ambient noise
management,
FEATURES
APPLICATIONS
Wolfson myZone™ Ambient Noise Cancellation (ANC)
-
-
-
-
Audio inputs
-
-
-
Headphone driver (LDO4VOUT = 1.8V)
-
-
-
-
Integration
-
-
-
Miscellaneous
-
-
-
-
-
-
“Pod-style” stereo ear-buds, headsets, headphones with
ANC
“Supra-Aural” stereo headphones with ANC
Mono/Stereo Bluetooth headsets with ANC
>30dB (peak), 25dB (typical) ambient noise reduction*
Wide noise cancellation bandwidth (40Hz to 4kHz)*
* depending on acoustic configuration
Multiple banks of ANC coefficients can be programmed to
Up to 10 analogue or digital microphones
Single-ended or differential analogue microphone input
2 single-ended or 1 differential line input per channel
45mW per channel into 16Ω load
22mW per channel into 32Ω load
Single-ended or differential (BTL) drive configuration
-80dB THD+N for differential (BTL) drive
On-chip DC-DC boost converter, charge-pump and LDOs
Flexible power supply options, including single cell
Internal crystal oscillator
Monitor pin to select mute / talk-through modes
LED driver
Tone generator for audible status indication
Pop and click noise protection circuit
RFI suppression
48-pin QFN package (7 x 7 x 0.75mm, 0.5mm pitch)
support different operating conditions
battery (1 x AAA battery) or (2 x AAA/AAAA)
Copyright ©2010 Wolfson Microelectronics plc
Product Brief, August 2010, Rev 1.1
WM2002
TM

Related parts for wm2002

wm2002 Summary of contents

Page 1

... Stereo Headphone Driver with Wolfson myZone DESCRIPTION The WM2002 is a low power, high quality stereo headphone driver, delivering Wolfson’s patented myZone cancellation in a single-ended or BTL (bridge-tied-load) output configuration. The WM2002 supports analogue playback or voice input, and analogue or digital microphone inputs for noise- monitoring microphones ...

Page 2

... WM2002 BLOCK DIAGRAM w Product Preview Product Brief, August 2010, Rev 1.1 2 ...

Page 3

... DEVICE RANGE o WM2002GEFL/V - +85 o WM2002GEFL/RV - +85 Note: Reel quantity = 2,200 w PACKAGE 48-pin QFN o C (Pb-free) 48-pin QFN o C (Pb-free, tape and reel) WM2002 MOISTURE PEAK SOLDERING TEMPERATURE SENSITIVITY LEVEL o MSL3 260 C o MSL3 260 C Product Brief, August 2010, Rev 1.1 3 ...

Page 4

... WM2002 PIN DESCRIPTION PIN NAME TYPE LED/ Analogue Output / 1 Digital Input DMICDAT5 SCAN Digital Input 2 3 MON Digital Input ADDR Digital Input 4 SDA Digital Input/Output 5 6 SCLK Digital Input 7 LDO1VDD Supply 8 LDO1VOUT Analogue Output / Supply 9 MICVDD Supply 10 MICBIAS Analogue Output 11 LDO3VOUT ...

Page 5

... DMICDAT4 Digital Input w DESCRIPTION Current reference resistor connection Digital buffer supply, including digital microphone interface Digital microphone interface clock Digital microphone data pin 1 Digital microphone data pin 2 Digital microphone data pin 3 Digital microphone data pin 4 WM2002 Product Brief, August 2010, Rev 1.1 5 ...

Page 6

... WM2002 ABSOLUTE MAXIMUM RATINGS Absolute Maximum Ratings are stress ratings only. Permanent damage to the device may be caused by continuously operating at or beyond these limits. Device functional operating limits and guaranteed performance specifications are given under Electrical Characteristics at the test conditions specified. ESD Sensitive Device. This device is manufactured on a CMOS process therefore generically susceptible to damage from excessive static voltages ...

Page 7

... X Line PGA -6dB to +6dB in 1dB steps OTP Memory Control Control Interface Sequencer TM (ANC) engine within the WM2002 improves the intelligibility of a voice call by WM2002 DC-DC Boost LDO Regulators BATTVDD Converter Bandgap CPVOUT reference CPGND Charge Pump Stereo Headphone CFB1 CFB2 HPOUTLP ...

Page 8

... WM2002 RECOMMENDED EXTERNAL COMPONENTS Figure 2 External Components Diagram w Product Preview Product Brief, August 2010, Rev 1.1 8 ...

Page 9

... In this example, the DC1 boost converter and the Charge Pump are not used. In other cases where the DC1 boost converter and Charge Pump circuits are used (for example, when the WM2002 is powered from a single AAA battery), some additional external components are required, as shown in Figure 3. ...

Page 10

... WM2002 PACKAGE DIMENSIONS FL: 48 PIN QFN PLASTIC PACKAGE EXPOSED GND PADDLE Symbols Dimensions (mm) MIN NOM A 0.75 0 0.035 0. 0.203 REF A3 b 0.20 0.25 D 7.00 BSC D2 5.55 5.65 E 7.00 BSC E2 5.55 5.65 e 0.5 BSC L 0.35 0.4 Tolerances of Form and Position aaa 0.10 0.08 bbb 0.10 ccc REF JEDEC, MO-220 NOTES: 1. DIMENSION b APPLIED TO METALLIZED TERMINAL AND IS MEASURED BETWEEN 0.15 mm AND 0.30 mm FROM TERMINAL TIP. ...

Page 11

... Wolfson is not liable for any such representations, warranties or liabilities or for any reliance placed thereon by any person. ADDRESS Wolfson Microelectronics plc Westfield House 26 Westfield Road Edinburgh EH11 2QB Tel :: +44 (0)131 272 7000 Fax :: +44 (0)131 272 7001 Email :: sales@wolfsonmicro.com w WM2002 Product Brief, August 2010, Rev 1.1 11 ...

Related keywords