sfs3-l-dc48v Panasonic Corporation of North America, sfs3-l-dc48v Datasheet - Page 3

• Manufacturer Part Number: sfs3-l-dc48v
• Description: Slim Compact Safety Relay
• Manufacturer: Panasonic Corporation of North America

2. Specifications (relay)
Notes: *1 This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the
3. Specifications (PC board sockets/DIN terminal socket)
Contact
Rating
Electrical
characteristics
Mechanical
characteristics
Expected life
Conditions
Unit weight
Max. carrying current
Initial breakdown voltage
Initial insulation resistance
Characteristics
*2 Response time is the time after the coil voltage turns off until the time when “a” contact turns off.
*3 The upper operation ambient temperature limit is the maximum temperature that can satisfy the coil temperature rise value.
actual load.
Refer to 6. Conditions for operation, transport and storage mentioned in AMBIENT ENVIRONMENT.
Item
Contact arrangement
Initial contact resistance, max
Contact material
Nominal switching capacity (resistive load)
Max. switching power (resistive load)
Max. switching voltage
Max. switching current
Min. switching capacity (Reference value)*
Nominal operating power
Insulation resistance (Initial)
Breakdown
voltage
(Initial)
Operate time (at 20°C 68°F)
Response time (at 20°C 68°F)*
Release time (at 20°C 68°F)
Shock
resistance
Vibration
resistance
Mechanical
Electrical
Conditions for operation, transport and
storage*
Max. Operating speed
3
Between open contacts
Between contact sets
Between contact and coil
Functional
Destructive
Functional
Destructive
Item
6 A (Reduce by 0.1 A/°C for temperatures 70 to 85°C.)
Between each terminal: 2,500 Vrms for 1 min. (Detection current: 10mA)
Min. 1,000MΩ (at 500V DC) Measurement at same location as “Initial breakdown voltage” section.
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
2
1
2 Form A 2 Form B 3 Form A 1 Form B 4 Form A 2 Form B 5 Form A 1 Form B 3 Form A 3 Form B
Max. 100 mΩ (By voltage drop 6 V DC 1A)
Au flashed AgSnO
6A 250V AC, 6A 30V DC
1,500VA, 180W
250V AC, 30V DC
6 A (Reduce by 0.1 A/°C for temperatures 70 to 85°C.)
1mA 5V DC
360mW
Min. 1,000MΩ (at 500V DC) Measurement at same location as “Initial breakdown voltage” section.
1,500 Vrms for 1 min. (Detection current: 10mA.)
2,500 Vrms for 1 min.
(Detection current: 10mA.);
7-8/9-10 between open contacts
4,000 Vrms for 1 min.
(Detection current: 10mA.);
3-4/5-6 between open contacts
3-4/7-8 between open contacts
5-6/9-10 between open contacts
4,000 Vrms for 1min (Detection current: 10mA.)
Max. 20ms (Nominal voltage applied to the coil, excluding contact bounce time.)
Max. 8ms (Nominal voltage applied to the coil, excluding contact bounce time.) (without diode)
Max. 20ms (Nominal voltage applied to the coil, excluding contact bounce time.) (without diode)
Min. 200 m/s
Min. 1,000 m/s
10 to 55 Hz at double amplitude of 1.5 mm (Detection time: 10µs.)
10 to 55 Hz at double amplitude of 1.5 mm
Min. 10
250 V AC 6 A resistive load: Min. 10
30 V DC 6 A resistive load: Min. 10
250 V AC 1 A resistive load: Min. 5×10
30 V DC 1 A resistive load: Min. 5×10
[AC 15] 240 V AC 2 A inductive load: Min. 10
[DC 13] 24 V DC 1 A inductive load: Min. 10
Ambient temperature: –40°C to +85°C
Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature)
20 cpm (at max. rating)
Approx. 20 g
7
(at 180 cpm)
2
.71 oz
(Half-wave pulse of sine wave: 11 ms; detection time: 10µs.)
2
(Half-wave pulse of sine wave: 6 ms.)
4-pole
2
type
Specifications
5
5
(at 20 cpm)
(at 20 cpm)
5
5
(at 30 cpm)
–40°F to +185°F
(at 30 cpm)
500mW
2,500 Vrms for 1 min. (Detection current: 10mA.);
7-8/11-12 between open contacts
9-10/13-14 between open contacts
11-12/13-14 between open contacts
4,000 Vrms for 1 min. (Detection current: 10mA.);
3-4/5-6 between open contacts
3-4/7-8 between open contacts
5-6/9-10 between open contacts
7-8/9-10 between open contacts
Approx. 23 g
5
5
Specifications
(at 20 cpm, L/R = 48 ms)
(at 20 cpm, cosϕ = 0.3)
.81 oz
6-pole
SFS