cxa1396d Sony Electronics, cxa1396d Datasheet - Page 15

• Manufacturer Part Number: cxa1396d
• Description: 8-bit 125 Msps Flash A/d Converter
• Manufacturer: Sony Electronics

10) Rn10, Rn11 and Rn12 are not mounted at shipment. They are not required during evaluation.
11) Waveform probe pins P5 and P8 through P28 are devised to facilitate GND connection in order to reduce
12) D/A converter (IC13) input data (waveform probe pins P21 through P28) are the complementary signals of
13) The part unmber of the digital output connector is KEL 8830E-020-170S. A corresponding connector and
the distortion. As shown in the diagram below, the distance between the probe point and the GND is 300
mil, and there is 1.2mm through hole at each. The signal and GND locations are suit for a Tektronix GND
tip (part number 013-1185-00).
the decimated A/D converter outputs. Those are inverted again in the D/A converter so that the direction
of reproduced waveform can agree with the A/D input signal converter.
cable assembly is JUNKOSMA KBO020MCG50BI.
GND
300mil
Fig. 3
– 15 –
1.2mm
Probe point
CXA1396D