icx058cl Sony Electronics, icx058cl Datasheet - Page 11

• Manufacturer Part Number: icx058cl
• Description: Diagonal 6mm Type 1/3 Ccd Image Sensor For Eia Black-and-white Video Camera
• Manufacturer: Sony Electronics

6. Dark signal shading
7. Flicker
8. Lag
After measuring 5, measure the maximum (Vdmax [mV]) and minimum (Vdmin [mV]) values of the dark
signal output and substitute the values into the following formula.
Set to standard imaging condition II. Adjust the luminous intensity so that the average value of the signal
output is 200mV, and then measure the difference in the signal level between fields ( Vf [mV]). Then
substitute the value into the following formula.
F = ( Vf/200)
Adjust the signal output value generated by strobe light to 200mV. After setting the strobe light so that it
strobes with the following timing, measure the residual signal (Vlag). Substitute the value into the following
formula.
Lag = (Vlag/200)
Vdt = Vdmax – Vdmin [mV]
Strobe light
Output
timing
SG1
FLD
100 [%]
100 [%]
Light
Signal output 200mV
– 11 –
Vlag (lag)
ICX058CL