msm6679a-110 Oki Semiconductor, msm6679a-110 Datasheet - Page 39

• Manufacturer Part Number: msm6679a-110
• Description: Si/sd Voice Recognizer, Recorder/player, And Speech Synthesizer
• Manufacturer: Oki Semiconductor

¡ Semiconductor
Speak (Continued)
Opcode
F451h ~
F47Ch
F47D
F47Eh
F47Fh
F480h
F481h -
F4FFh
F50Bh
Speak Phrase from High Internal/External
Memory. If no sound is defined for a selected
index, the MSM6679A-110 plays a beep. The
default phrases supplied with the MSM6679A-
110 in the larger upper playback memory area
are listed below.
F451h
F452h
F453h
F454h
F455h
F456h
F457h
F458h
F459h
F45Ah
F45Bh
F45Ch
Reserved. This command is reserved for future
use.
Beep. This causes the MSM6679A-110 to beep
for 50 ms.
Pause. This command can be issued while the
MSM6679A-110 is performing sound output
and is then put in the MSM6679A-110
command stack for subsequent processing.
When this command is executed, sound output
pauses for 0.2 sec.
The pause command is useful for word
spacing.
Set MSM6654 Mode. This command causes
the MSM6679A-110 to initialize
the external MSM665x device, also clearing the
device from BUSY mode.
Playback Sound from MSM665x Device. This
command causes the MSM6679A-110 to issue
a speak command to the MSM665x slave
device.
The value is passed on the MSM665x device as
01h - 07Fh. The actual phrase is determined by
the vocabulary programmed into the MSM665x
device. Up to 127 external phrases are
supported.
Set MSM665x Busy Mode ON.
"0" simulated DTMF tone.
"1" simulated DTMF tone.
"2" simulated DTMF tone.
"3" simulated DTMF tone.
"4" simulated DTMF tone.
"5" simulated DTMF tone.
"6" simulated DTMF tone.
"7" simulated DTMF tone.
"8" simulated DTMF tone.
"9" simulated DTMF tone.
"*" simulated DTMF tone.
"#" simulated DTMF tone.
Action
MSM6679A-110 Voice Recognition Processor
F400h
—
F400h
F400h
None.
F400h
None.
If enabled, this value is returned upon
completion of playback.
—
If enabled, this value is returned upon
completion of playback.
If enabled, this value is returned upon
completion of playback.
If enabled, this value is returned upon
completion of playback.
If NAR is set, the F400h command is
sent when the MSM665x device is ready
for another command. If busy mode is
selected, the F400 command is
returened when the sound is finished.
Return Value
37