Z8S180 Zilog., Z8S180 Datasheet - Page 120

• Manufacturer Part Number: Z8S180
• Description: ENHANCED Z180 MICROPROCESSOR
• Manufacturer: Zilog.

In addition, the operation of channel 0 DMA with the on-chip ASCI
(Asynchronous Serial Communication Interface) as well as Channel 1
DMA are described.
Memory to Memory— Channel 0
For memory to/from memory transfers, the external DREQ0 input is not
used for DMA transfer timing. Rather, the DMA operation is timed in one
of two programmable modes – BURST or CYCLE STEAL. In both
modes, the DMA operation automatically proceeds until termination
(shown by byte count-BCR0) =
In BURST mode, the DMA operation proceeds until termination. In this
case, the CPU cannot perform any program execution until the DMA
operation is completed. In CYCLE STEAL mode, the DMA and CPU
operation are alternated after each DMA byte transfer until the DMA is
completed. The sequence:
•
•
is repeated until DMA is completed. Figure 46 describes CYCLE STEAL
mode DMA timing.
1 CPU Machine Cycle
DMA Byte Transfer
0
.
M PU Us e r M anual
UM005001-ZMP0400
Z 8018x Fam il y
105