AT89C51CC02CA-TDSUM ATMEL [ATMEL Corporation], AT89C51CC02CA-TDSUM Datasheet - Page 58

• Manufacturer Part Number: AT89C51CC02CA-TDSUM
• Description: Enhanced 8-bit Microcontroller with CAN Controller and Flash
• Manufacturer: ATMEL [ATMEL Corporation]

Mode 0 (13-bit Timer)
Figure 24. Timer/Counter x (x= 0 or 1) in Mode 0
Mode 1 (16-bit Timer)
Figure 25. Timer/Counter x (x= 0 or 1) in Mode 1
Mode 2 (8-bit Timer with Auto-
Reload)
58
See section “Clock”
INTx#
INTx#
See section “Clock”
AT/T89C51CC02
CLOCK
CLOCK
FTx
Tx
FTx
Tx
TMOD Reg
GATEx
TMOD Reg
GATEx
÷ 6
÷ 6
TMOD Reg
TMOD Reg
C/Tx#
C/Tx#
Mode 0 configures Timer 0 as an 13-bit Timer which is set up as an 8-bit Timer (TH0
register) with a modulo 32 prescaler implemented with the lower five bits of TL0 register
(See Figure 24). The upper three bits of TL0 register are indeterminate and should be
ignored. Prescaler overflow increments TH0 register.
Mode 1 configures Timer 0 as a 16-bit Timer with TH0 and TL0 registers connected in
cascade (See Figure 25). The selected input increments TL0 register.
0
1
Mode 2 configures Timer 0 as an 8-bit Timer (TL0 register) that automatically reloads
from TH0 register (See Figure 26). TL0 overflow sets TF0 flag in TCON register and
reloads TL0 with the contents of TH0, which is preset by software. When the interrupt
request is serviced, hardware clears TF0. The reload leaves TH0 unchanged. The next
reload value may be changed at any time by writing it to TH0 register.
0
1
TCON Reg
TCON Reg
TRx
TRx
(8 bits)
(8 bits)
THx
THx
(8 bits)
(5 bits)
TLx
TLx
Overflow
Overflow
TCON Reg
TCON Reg
TFx
TFx
Timer x
Interrupt
Request
Timer x
Interrupt
Request
4126J–CAN–05/06