W25X10BLSNIG WINBOND [Winbond], W25X10BLSNIG Datasheet - Page 4

• Manufacturer Part Number: W25X10BLSNIG
• Description: 1M-BIT, 2M-BIT AND 4M-BIT 2.5V SERIAL FLASH MEMORY WITH 4KB SECTORS AND DUAL I/O SPI
• Manufacturer: WINBOND [Winbond]

The W25X10BL (1M-bit), W25X20BL (2M-bit) and the W25X40BL (4M-bit) Serial Flash memories
provides a storage solution for systems with limited space, pins and power. The 25X series offers
flexibility and performance well beyond ordinary Serial Flash devices. They are ideal for code download
applications as well as storing voice, text and data. The devices operate on a single 2.3V to 3.6V
power supply with current consumption as low as 4mA active and 1µA for power-down. All devices are
offered in space-saving packages.
The W25X10BL/20BL/40BL arrays are organized into 512/1,024/2,048 programmable pages of 256-
bytes each. Up to 256 bytes can be programmed at a time using the Page Program instruction. Pages
can be erased in groups of 16 (sector erase), groups of 128 (32KB block erase), groups of 256 (block
erase) or the entire chip (chip erase). The W25X10BL/20BL/40BL has 32/64/128 erasable sectors and
2/4/8 erasable 64KB blocks respectively. The small 4KB sectors allow for greater flexibility in
applications that require data and parameter storage. (See figure 2.)
The W25X10BL/20BL/40BL supports the standard Serial Peripheral Interface (SPI), and a high
performance dual output as well as Dual I/O SPI: Serial Clock, Chip Select, Serial Data DI (I/O0), DO
(I/O1). SPI clock frequencies of up to 50MHz are supported allowing equivalent clock rates of 100MHz
when using the Fast Read Dual Output instruction. These transfer rates are comparable to those of 8
and 16-bit Parallel Flash memories.
A Hold pin, Write Protect pin and programmable write protect, with top or bottom array control features,
provide further control flexibility. Additionally, the device supports JEDEC standard manufacturer and
device identification.
• Family of Serial Flash Memories
• SPI with Single / Dual Outputs / Dual I/O
• Data Transfer up to 100M-bits / second
• Efficient “Continuous Read Mode”
– W25X10BL: 1M-bit/128K-byte (131,072)
– W25X20BL: 2M-bit/256K-byte (262,144)
– Clock operation to 50MHz
– Fast Read Dual Output instruction
– Auto-increment Read capability
– Low Instruction overhead
– Continuous Read
– As few as 8 clocks to address memory
– Allows true XIP (execute in place) operation
1. GENERAL DESCRIPTION
– W25X40BL: 4M-bit/512K-byte (524,288)
– 256-bytes per programmable page
– Uniform 4KB Sectors, 32KB & 64KB Blocks
– Clock, Chip Select, Data I/O, Data Out
– Optional Hold function for SPI flexibility
2. FEATURES
- 4 -
• Software and Hardware Write Protection
• Flexible Architecture with 4KB sectors
• Low Power Consumption, Wide
• Space Efficient Packaging
– Write-Protect all or portion of memory
– Enable/Disable protection with /WP pin
– Top or bottom array protection
– Volatile & Non-volatile Status Register Bits
– Sector Erase (4K-bytes)
– Block Erase (32K and 64K-byte)
– Page program up to 256 bytes <1ms
– More than 100,000 erase/write cycles
– More than 20-year retention
– Single 2.3 to 3.6V supply
– 4mA active current, 1µA Power-down (typ)
– -40° to +85°C operating range
– 8-pin SOIC 150-mil
– 8-pin SOIC 208-mil
– 8-pad WSON 6x5-mm
– 8-pin PDIP 300-mil
Temperature Range
W25X10BL/20BL/40BL