LP2952 National Semiconductor, LP2952 Datasheet - Page 9

• Manufacturer Part Number: LP2952
• Description: Adjustable Micropower Low-Dropout Voltage Regulators
• Manufacturer: National Semiconductor

Schematic Diagram
Application Hints
HEATSINK REQUIREMENTS (Industrial Temperature
Range Devices)
The maximum allowable power dissipation for the LP2952/
LP2953 is limited by the maximum junction temperature
(+125˚C) and the external factors that determine how quickly
heat flows away from the part: the ambient temperature and
the junction-to-ambient thermal resistance for the specific
application.
The industrial temperature range (−40˚C
parts are manufactured in plastic DIP and surface mount
packages which contain a copper lead frame that allows
heat to be effectively conducted away from the die, through
T
J
+125˚C)
9
the ground pins of the IC, and into the copper of the PC
board. Details on heatsinking using PC board copper are
covered later.
To determine if a heatsink is required, the maximum power
dissipated by the regulator, P(max), must be calculated. It is
important to remember that if the regulator is powered from
a transformer connected to the AC line, the maximum
specified AC input voltage must be used (since this pro-
duces the maximum DC input voltage to the regulator). Fig-
ure 1 shows the voltages and currents which are present in
the circuit. The formula for calculating the power dissipated
in the regulator is also shown in Figure 1 :
www.national.com
DS011127-6