M306V5EESP Mitsubishi, M306V5EESP Datasheet - Page 195

• Manufacturer Part Number: M306V5EESP
• Description: SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER with CLOSED CAPTION DECODER and ON-SCREEN DISPLAY CONTROLLER
• Manufacturer: Mitsubishi

Rev. 1.0
Notes 1: Color palette 8 is always selected for bordering and solid space output (OUT 1 output) regardless
2.16.7 Character Color
2.16.8 Character Background Color
As shown in Figure 2.16.26, there are 16 built-in color codes. Color palette 0 is fixed at transparent, and
color palette 8 is fixed at black. The remaining 14 colors can be set to any of the 512 colors available. The
setting procedure for character colors is as follows:
• CC mode ........................................ 8 kinds
• OSDS/L/P mode ........................... 16 kinds
• CDOSD mode ............................... 16 kinds
• SPRITE display ............................ 16 kinds
The display area around the characters can be colored in with a character background color. Character
background colors are set in character units.
• CC mode ........................................ 4 kinds
• OSDS/L/P mode ........................... 16 kinds
Note: The character background is displayed in the following part:
Color palette selection range (color palettes 0 to 7 or 8 to 15) can be selected by bit 0 of the OSD control
register 3 (address 0207
the selection range.
Color palettes are set by bits RC11 to RC14 of the OSD RAM.
Color palettes are set in dot units according to CD font data.
Only in CDOSD mode, a dot which selects color palette 0 or 8 is colored to the color palette set by RC13
to RC16 of OSD RAM in character units (refer to Figure 2.16.28).
Color palettes are set in dot units according to the CD font data.
Color palette selection range (color codes 0 to 3, 4 to 7, 8 to 11, or 12 to 15) can be selected by bits 1 and
2 of the OSD control register 3 (address 0207
OSD RAM from among the selection range.
Color palettes are set by bits RC15, RC16, RC20, and RC21 of the OSD RAM.
2: Color palette 0 (transparent) and the transparent setting of other color palettes will differ. When
of the set value in the register.
there are multiple layers overlapping (on top of each other, piled up), and the priority layer is color
palette 0 (transparent), the bottom layer is displayed, but if the priority layer is the transparent
setting of any other color palette, the background is displayed without displaying the bottom layer
(refer to Figure 2.16.28).
(character display area) – (character font) – (border).
Accordingly, the character background color and the color signal for these two sections cannot be
mixed.
16
SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER with CLOSED CAPTION DECODER
). Color palettes are set by bits RC11 to RC13 of the OSD RAM from among
16
). Color palettes are set by bits RC20 and RC21 of the
and ON-SCREEN DISPLAY CONTROLLER
MITSUBISHI MICROCOMPUTERS
M306V5ME-XXXSP
M306V5EESP
195