ZL50232GDC ZARLINK [Zarlink Semiconductor Inc], ZL50232GDC Datasheet - Page 29

• Manufacturer Part Number: ZL50232GDC
• Description: 32 Channel Voice Echo Canceller
• Manufacturer: ZARLINK [Zarlink Semiconductor Inc]

Functional Description of Register Bits
The Exponential Decay registers (Decay Step Number and Decay Step Size) and Flat Delay register allow the LMS
adaptation step-size (MU) to be programmed over the length of the FIR filter. A programmable MU profile allows the
performance of the echo canceller to be optimized for specific applications. For example, if the characteristic of the
echo response is known to have a flat delay of several milliseconds and a roughly exponential decay of the echo
impulse response, then the MU profile can be programmed to approximate this expected impulse response thereby
improving the convergence characteristics of the Adaptive Filter. Note that in the following register descriptions, one
tap is equivalent to 125 µs (64 ms/512 taps).
FD
SSC
NS
7-0
7-0
2-0
Amplitude of MU
Flat Delay
Decay Step Size Control
Decay Step Number: This register defines the number of steps to be used for the decay of MU where each
1.0
2
-16
delay is defined as FD
echo canceller FIR filter. The valid range of FD
128 in extended-delay mode. The default value of FD
of MU. The decay rate is defined as a decrease of MU by a factor of 2 every SS taps of the FIR filter,
where SS = 4 x2
the FIR filter. The default value of SSC
step has a period of SS taps (see SSC
Length (512 or 1024) - [Decay Step Number (NS
For example; If NS
512 - [4 x (4x2
Flat Delay (FD
:
This register defines the flat delay of the MU profile, (i.e., where the MU value is 2
4
)] = 256 taps for a filter length of 512 taps.
SSC
7-0
7-0
)
2-0
=4 and SSC
:
. For example; If SSC
7-0
This register controls the step size (SS) to be used during the exponential decay
x 8 taps. For example; If FD
FIR Filter Length (512 or 1024 taps)
Figure 17 - The MU Profile
2-0
Zarlink Semiconductor Inc.
=4, then the exponential decay start value is 512 - [NS
ZL50232
2-0
2-0
is 04
2-0
29
). The start of the exponential decay is defined as: Filter
= 4, then MU is reduced by a factor of 2 every 64 taps of
hex
7-0
7-0
.
is: 0 ≤ FD
) x Step Size (SS)] where SS = 4 x2
7-0
7-0
is zero.
= 5, then MU=2
7-0
Step Size (SS)
≤ 64 in normal mode and 0 ≤ FD
Number of Steps (NS
-16
for the first 40 taps of the
SSC
Data Sheet
7-0
Time
2-0
7-0
)
.
-16
x SS] =
). The
7-0
≤