ACX302 SONY [Sony Corporation], ACX302 Datasheet - Page 23

• Manufacturer Part Number: ACX302
• Description: 8.80cm (3.5 Type) NTSC/PAL Color LCD Panel
• Manufacturer: SONY [Sony Corporation]

Notes on Handling
(1) Static charge prevention
(2) Protection from dust and dirt
(3) Other handling precautions
Be sure to take the following protective measures. TFT-LCD panels are easily damaged by static charges.
a) Use non-chargeable gloves, or simply use bare hands.
b) Use an earth-band when handling.
c) Do not touch any electrodes of a panel.
d) Wear non-chargeable clothes and conductive shoes.
e) Install grounded conductive mats on the working floor and working table.
f) Keep panels away from any charged materials.
g) Use ionized air to discharge the panels.
a) Operate in a clean environment.
b) Do not touch the polarizer surface. The surface is easily scratched. When cleaning, use a clean-room
c) Use ionized air to blow dust off the panel.
a) Do not twist or bend the flexible PC board especially at the connecting region because the board is
b) Do not drop the panel.
c) Do not twist or bend the panel or panel frame.
d) Keep the panel away from heat sources.
e) Do not dampen the panel with water or other solvents.
f) Avoid storing or using the panel at high temperatures or high humidity, as this may result in panel damage.
wiper with isopropyl alcohol. Be careful not to leave stains on the surface.
easily deformed.
– 23 –
ACX302AK