LCMXO2-2000HC-4MG132I Lattice, LCMXO2-2000HC-4MG132I Datasheet - Page 4

• Manufacturer Part Number: LCMXO2-2000HC-4MG132I
• Description: FPGA - Field Programmable Gate Array 2112 LUTs 105 IO 3.3V 4 Spd
• Manufacturer: Lattice

Specifications of LCMXO2-2000HC-4MG132I

• Rohs: yes
• Maximum Operating Frequency: 133 MHz
• Operating Supply Voltage: 2.5 V, 3.3 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Package / Case: BGA-132
• Minimum Operating Temperature: - 40 C
• Operating Supply Current: 82 uA
• Factory Pack Quantity: 360

1.0 INTRODUCTION
The MachXO2 family of ultra-low power, instant-on, non-volatile PLDs has six devices with densities ranging
from 256 to 6864 Look-Up Tables (LUTs). In addition to LUT-based, low-cost programmable logic these devices
feature Embedded Block RAM (EBR), Distributed RAM, User Flash Memory (UFM), Phase Locked Loops
(PLLs), pre-engineered source synchronous I/O support, advanced configuration support including dual-boot
capability and hardened versions of commonly used functions such as SPI controller, I2C controller and
timer/counter. These features allow these devices to be used in low cost, high volume consumer and system
applications.
The MachXO2 devices are designed on a 65nm non-volatile low power process. The device architecture has
several features such as programmable low swing differential I/Os and the ability to turn off I/O banks, on-chip
PLLs and oscillators dynamically. These features help manage static and dynamic power consumption resulting
in low static power for all members of the family.
The MachXO2 devices are available in three options – ultra low power (ZE) and high performance (HC and HE)
devices. The ultra-low power devices are offered in three speed grades -1, -2 and -3, with -3 being the fastest.
Similarly, the high-performance devices are offered in three speed grades: -4, -5 and -6, with -6 being the
fastest. HC devices have an internal linear voltage regulator which supports external VCC supply voltages of
3.3V or 2.5V. ZE and HE devices only accept 1.2V as the external VCC supply voltage. With the exception of
power supply voltage all three types of devices (ZE, HC and HE) are functionally compatible and pin compatible
with each other.
The MachXO2 PLDs are available in a broad range of advanced halogen-free packages ranging from the space
saving 2.5x2.5 mm WLCSP to the 23x23 mm fpBGA. MachXO2 devices support density migration within the
same package.
INDEX Return
Lattice Semiconductor Corporation Doc. #25-106923 Rev. F
4