WIZ1000-US WIZnet, WIZ1000-US Datasheet - Page 35

• Manufacturer Part Number: WIZ1000-US
• Description: Ethernet Modules 1 PORT SERIAL-ENET DEVICE SERVER 110V
• Manufacturer: WIZnet

Specifications of WIZ1000-US

• Rohs: yes
• Product: Serial to Ethernet Servers
• Interface Type: RS-232
• Operating Supply Voltage: 5 V
• Maximum Operating Temperature: + 70 C
• Dimensions: 75 mm x 45 mm
• Minimum Operating Temperature: 0 C

STEP 2: Connect the WIZ1000 to the serial device by using serial cable.
STEP 3: Connect 5V DC adaptor for power supplying.
6.2.
Testing Serial to Ethernet Function
STEP1: Power on WIZ1000 board.
STEP2: Configure the WIZ1000 by using Configuration Tool program.
STEP3: Execute terminal emulator program such as Hyper Terminal, and select the COM port
that WIZ1000 will use.
STEP4: Set the Baud rate as WIZ1000.
STEP5: Execute another Hyper terminal, and open the TCP/IP(Winsock) for setting IP and Port.
STEP6: Type some characters at the screen of serial Hyper terminal. For example,
“01234567890” is input.
STEP7: The input characters of STEP 6, is displayed in the screen of network Hyper terminal.
(Checking “Serial to Ethernet” function)
STEP8: You can check “Ethernet to Serial” function by inputting some character in the screen of
Network terminal and checking them in the serial terminal.
Above function can be tested by Device Terminal program that WIZnet is providing.
Figure 19. Device Terminal
Copyright © WIZnet All Rights Reserved
WIZ1000 | 35 page