MAX1308EVB16 Maxim Integrated, MAX1308EVB16 Datasheet - Page 3

• Manufacturer Part Number: MAX1308EVB16
• Description: Data Conversion IC Development Tools MAX1308 Evaluation Kit/Evaluation System
• Manufacturer: Maxim Integrated
• Series: MAX1304, MAX1305, MAX1306, MAX1308, MAX1309, MAX1310, MAX1312, MAX1313, MAX1314r

Specifications of MAX1308EVB16

• Interface Type: SPI

• MAX1308EVB16 EV system (MAX1308 EV kit and
• Three power supplies:
• Waveform generator (optional)
• Digital voltmeter (DVM)
• User-supplied 9-pin serial extension cable
• User-supplied Windows 98/2000/XP PC with an
• Logic analyzer (optional)
Caution: Do not turn on the power until all the con-
nections are completed.
1) Visit the Maxim website (www.maxim-ic.com/evkit-
2) Install the MAX1308 EV kit software on your com-
3) Set JU1 to 1-2 (selects midscale reference for bipo-
4) Set JU2 to 1-2 (selects on-board external refer-
5) Remove the shunt from JU3 (disables autoread fea-
6) Set JU4 to 1-2 (enables the MAX1308 internal
7) Set JU5–JU12 to 1-2 (selects buffered input for
8) Set JU13 to 2-3 (selects midscale reference for
9) Set JU14 to 1-2 (enables the MAX1308 internal clock).
10) Set JU15 to 2-3 (selects VCC from 68HC16MOD-
68HC16MOD-16WIDE µC module)
available RS-232 serial port
Recommended Equipment—RS-232/COM
software) to download the latest version of the EV kit
software. Save the EV kit software to a temporary
folder and uncompress the file (if it is a .zip file).
puter by running the INSTALL.EXE program. The
program files are copied and icons are created for
them in the Windows Start | Programs menu.
lar operation).
ence).
ture).
clock).
channel 0 through channel 7).
bipolar operation).
16WIDE as DVDD).
1) 7V or higher (up to 20V) at 300mA for the
2) 5V at 250mA for AVDD
3) ±5.5V at 250mA for HVAVCC and HVAVEE
68HC16MOD-16WIDE
(or ±10V at 250mA to evaluate the
MAX1312ECM–MAX1315ECM)
MAX1308 Evaluation Kit/Evaluation System
_______________________________________________________________________________________
Port PC Connection Option
Procedure
11) Set JU16 to 2-3 (selects HVAVCC pad as positive
12) Connect the MAX1308 EV kit’s two 40-pin female
13) Connect the 9-pin serial cable from the computer’s
14) Connect the +5V power supply between the
15) Connect the ±5.5V power supply to the MAX1308
16) Connect the 7V (up to 20V supported) power supply
17) Turn on all three power supplies.
18) Turn on the 68HC16MOD-16WIDE by setting SW1
19) Measure the voltage at REF using the DVM and ver-
20) Start the MAX1308 EV kit software by double-clicking
supply for input buffers).
connectors (J3 and J4) to the 68HC16MOD-
16WIDE module’s two 40-pin male connectors (P1
and P2).
serial port to the 68HC16MOD-16WIDE module’s
DB9 connector (J3). Use a USB-to-serial adapter if
your computer does not have a serial port.
MAX1308 EV kit’s AVDD and AGND pads.
EV kit (+5.5V to HVAVCC pad, ground to AGND
pad, and -5.5V to HVAVEE pad).
to the 68HC16MOD-16WIDE’s power connector (J2).
to the ON position.
ify that the voltage is 2.500V ±0.025V.
its icon in the Start | Programs menu.
3