ICE40HX8K-DRAGON-EVN Lattice, ICE40HX8K-DRAGON-EVN Datasheet

Page 1

Qualcomm IR-I C Bridge Demo User’s Guide June 2012 UG63_01.0 ...

Page 2

Demo Setup 2 The Qualcomm IR-I C Bridge Demo setup consists of the iCE-Dragon Board which includes an IR-Receiver inter- faced with an iCE40™ mobileFPGA. The iCE-Dragon Board is interfaced with a J6 connector (Sensor board) of the 2 Dragonboard ...

Page 3

Print the IRQ Number The interrupt number is printed by adding the following lines to the board support package file found in the fol- lowing path: ..../8060_v3/kernel/arch/arm/mach-msm/board-msm8x60.c #define GPIO_IRDETECT_IRQ Under ‘static void __init msm8x60_dragon_init(void)’ add the following lines: uint32_t ...

Page 4

Edit init.rc and Rebuild Kernel When building the kernel source code for first time after using the ‘$make clean’ command, the default init.rc file will be created in this location: …./8060_v3/out/target/product/msm8660_surf/root Note: A modified init.rc file is provided with ...

Page 5

The board is now ready to be flashed with the boot.img file. d. Type the command below to flash the boot.img file: $cd …./8060_v3/out/target/product/msm8660_surf/ $fastboot flash boot boot.img If the boot.img file is installed correctly, you will see the OKAY ...

Page 6

Install IR_Scanner Application to Android The IR_Scanner application can be installed onto the Dragonboard by following the steps below. a. The Dragonboard is powered up and running Android. b. Select the IR_Scanner project from the Package Explorer window on ...

Page 7

... Date June 2012 © 2012 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal. All other brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice. ...