LP2998MA/NOPB National Semiconductor, LP2998MA/NOPB Datasheet - Page 13

• Manufacturer Part Number: LP2998MA/NOPB
• Description: IC REG TERM VOLT DDRI/II 8-SOIC
• Manufacturer: National Semiconductor

Specifications of LP2998MA/NOPB

• Applications: Converter, DDR, DDR2, DDR3
• Voltage - Input: 2.2 ~ 5.5 V
• Number Of Outputs: 1
• Operating Temperature: -40°C ~ 125°C
• Mounting Type: Surface Mount
• Package / Case: 8-SOIC (3.9mm Width)
• Primary Input Voltage: 2.5V
• No. Of Outputs: 1
• No. Of Pins: 8
• Output Current: 1.5A
• Operating Temperature Range: -40°C To +125°C
• Msl: MSL 1 - Unlimited
• Input Voltage Primary Max: 5.5V
• Rohs Compliant: Yes
• For Use With: LP2998EVAL - BOARD EVALUATION FOR LP2998
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Voltage - Output: -
• Other names: LP2998MA

DDR-II APPLICATIONS
With the separate VDDQ pin and an internal resistor divider
it is possible to use the LP2998 in applications utilizing DDR-
II memory.
tions of recommended circuits with output curves displayed
If it is not desirable to use the 1.8V rail it is possible to connect
the output stage to a 3.3V rail. Care should be taken to not
exceed the maximum operating junction temperature as the
thermal dissipation increases with lower V
Figure 6
and
Figure 7
FIGURE 5. SSTL-2 Implementation With Higher Voltage Rails
show several implementa-
FIGURE 7. DDR-II Termination With Higher Voltage Rails
FIGURE 6. Recommended DDR-II Termination
TT
output voltages.
13
in the Typical Performance Characteristics.
the recommended circuit configuration for DDR-II applica-
tions. The output stage is connected to the 1.8V rail and the
AVIN pin can be connected to either a 2.5, 3.3V or 5.5V rail.
For this reason it is not recommended to power PVIN with a
rail higher than the nominal 3.3V. The advantage of this con-
figuration is that it has the ability to source and sink a higher
maximum continuous current.
30026913
30026912
30026914
Figure 6
www.national.com
shows