XC9221A095MR Torex Semiconductor Ltd, XC9221A095MR Datasheet - Page 8

• Manufacturer Part Number: XC9221A095MR
• Description: IC CTLR DC/DC STPDN 500KHZ SOT25
• Manufacturer: Torex Semiconductor Ltd
• Type: Step-Down (Buck)r

Specifications of XC9221A095MR

• Internal Switch(s): No
• Synchronous Rectifier: No
• Number Of Outputs: 1
• Voltage - Output: 0.9V
• Current - Output: 3A
• Frequency - Switching: 500kHz
• Voltage - Input: 2.8 ~ 16 V
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: Surface Mount
• Package / Case: SOT-23-5, SC-74A, SOT-25
• Power - Output: 250mW
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 893-1105-2

8/22
■OPERATIONAL EXPLANATION (Continued)
<Protection Circuits>
2. Short-Circuit Protection Circuit (Latching Type)
1. Integral Protection Circuit (Latch Type)
XC9220/XC9221
In the circuit of the XC9220/XC9221 A and B series, the more load current becomes larger, the duty of the EXT/ pin
gradually expands, and the duty reaches maximum (EXT/L). When the MAXDUTY state continues a certain amount
of time (T
resuming the operation from the latching state, please turn off the IC via the CE pin or apply the input voltage again
(operates UVLO function and release). The latching state does not mean a complete shutdown, but a state in which
pulse output is suspended; therefore, the internal circuitry remains in operation.
However, the integral protection circuit uses the MAXDUTY as a trigger for its operation, it suspends the pulse output
no matter what dropout voltage decreases.
XC9220/XC9221 C or D series, which do not have the integral protection function, are recommended.
When the FB pin is shorted to the Ground or the output voltage drops rapidly because of over load state etc., the P-ch
driver transistor is kept OFF as in the case with the integral protection circuit. (The protection circuit operates when
the FB voltage becomes 0.7V or lower.) For releasing the latching state, the circuit is needed to restart via the V
the CE pin.
EXT/ Waveform
Integral protection circuit
Short-circuit protection circuit
FB Voltage
VREF
PRO
), the EXT/ pin holds high level (latching) and keeps the P-ch output driver transistor in OFF state. For
* Protection circuit does not operate.
Sof t-start time ：Tss x 90%
Ton < Tpro
Series
* A bout 100 to 200usec delay time is set
to avoid latching w hen instantaneous
transient response drop
Ton > Tpro
For the specification including small dropout voltage, the
Less than 100usec = Not latching
Protection circuit operates and
EXT/ Output shut dow n
Latch
Ton : ON Time ( EXT/ : L)
Tpro : Integral Protection Circuit
100 usec
Delay Time (Internally set)
Latch
0.9V
0.7V
0.9V
IN
or