LM2591HVT-5.0/NOPB National Semiconductor, LM2591HVT-5.0/NOPB Datasheet - Page 15

• Manufacturer Part Number: LM2591HVT-5.0/NOPB
• Description: IC REG SIMPLE SWITCHER TO220-5
• Manufacturer: National Semiconductor
• Series: SIMPLE SWITCHER®r
• Type: Step-Down (Buck)r

Specifications of LM2591HVT-5.0/NOPB

• Internal Switch(s): Yes
• Synchronous Rectifier: No
• Number Of Outputs: 1
• Voltage - Output: 5V
• Current - Output: 1A
• Frequency - Switching: 150kHz
• Voltage - Input: 4.5 ~ 60 V
• Operating Temperature: -40°C ~ 125°C
• Mounting Type: Through Hole
• Package / Case: TO-220-5 (Bent and Staggered Leads)
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Power - Output: -
• Other names: *LM2591HVT-5.0; *LM2591HVT-5.0/NOPB; LM2591HVT-5.0

Application Information
UNDERVOLTAGE LOCKOUT
Some applications require the regulator to remain off until
the input voltage reaches a predetermined voltage. An und-
ervoltage lockout feature applied to a buck regulator is
shown in Figure 8, while Figure 9 and Figure 10 applies the
same feature to an inverting circuit. The circuit in Figure 9
features a constant threshold voltage for turn on and turn off
(zener voltage plus approximately one volt). If hysteresis is
FIGURE 8. Undervoltage Lockout for Buck Regulator
(Continued)
FIGURE 7. Delayed Startup
15
needed, the circuit in Figure 10 has a turn ON voltage which
is different than the turn OFF voltage. The amount of hyster-
esis is approximately equal to the value of the output volt-
age. If zener voltages greater than 25V are used, an addi-
tional 47 kΩ resistor is needed from the ON /OFF pin to the
ground pin to stay within the 25V maximum limit of the ON
/OFF pin.
10129336
10129337
www.national.com