LM2592HVS-3.3/NOPB National Semiconductor, LM2592HVS-3.3/NOPB Datasheet - Page 15

• Manufacturer Part Number: LM2592HVS-3.3/NOPB
• Description: IC REG SIMPLE SWITCHER TO263-5
• Manufacturer: National Semiconductor
• Series: SIMPLE SWITCHER®r
• Type: Step-Down (Buck)r

Specifications of LM2592HVS-3.3/NOPB

• Internal Switch(s): Yes
• Synchronous Rectifier: No
• Number Of Outputs: 1
• Voltage - Output: 3.3V
• Current - Output: 2A
• Frequency - Switching: 150kHz
• Voltage - Input: 4.5 ~ 60 V
• Operating Temperature: -40°C ~ 125°C
• Mounting Type: Surface Mount
• Package / Case: D²Pak, TO-263 (5 leads + tab)
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Power - Output: -
• Other names: *LM2592HVS-3.3; *LM2592HVS-3.3/NOPB; LM2592HVS-3.3

Application Information
UNDERVOLTAGE LOCKOUT
Some applications require the regulator to remain off until
the input voltage reaches a predetermined voltage. An und-
ervoltage lockout feature applied to a buck regulator is
shown in Figure 8 , while Figure 9 and Figure 10 applies the
same feature to an inverting circuit. The circuit in Figure 9
features a constant threshold voltage for turn on and turn off
(zener voltage plus approximately one volt). If hysteresis is
This circuit has an ON/OFF threshold of approximately 13V.
lNVERTING REGULATOR
The circuit in Figure 11 converts a positive input voltage to a
negative output voltage with a common ground. The circuit
operates by bootstrapping the regulator’s ground pin to the
FIGURE 9. Undervoltage Lockout for Inverting Regulator
FIGURE 8. Undervoltage Lockout for Buck Regulator
(Continued)
FIGURE 7. Delayed Startup
15
needed, the circuit in Figure 10 has a turn ON voltage which
is different than the turn OFF voltage. The amount of hyster-
esis is approximately equal to the value of the output volt-
age. If zener voltages greater than 25V are used, an addi-
tional 47 k
ground pin to stay within the 25V maximum limit of the ON
/OFF pin.
negative output voltage, then grounding the feedback pin,
the regulator senses the inverted output voltage and regu-
lates it.
This example uses the LM2592HV-5.0 to generate a −5V
output, but other output voltages are possible by selecting
other output voltage versions, including the adjustable ver-
resistor is needed from the ON /OFF pin to the
10129436
10129437
10129484
www.national.com