PC410L0NIP0F Sharp Microelectronics, PC410L0NIP0F Datasheet - Page 11

• Manufacturer Part Number: PC410L0NIP0F
• Description: PHOTOCOUPLER OPIC 5-SOP
• Manufacturer: Sharp Microelectronics
• Series: OPIC™r

Specifications of PC410L0NIP0F

• Voltage - Isolation: 3750Vrms
• Number Of Channels: 1, Unidirectional
• Current - Output / Channel: 50mA
• Data Rate: 10Mbps
• Propagation Delay High - Low @ If: 48ns @ 7.5mA
• Current - Dc Forward (if): 20mA
• Input Type: DC
• Output Type: Open Collector
• Mounting Type: Surface Mount
• Package / Case: 6-SOIC (0.173", 4.40mm Width) 5 Leads
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 425-2141-2

● Cleaning instructions
● Presence of ODC
Solvent cleaning:
Ultrasonic cleaning:
Recommended solvent materials:
Solvent temperature should be 45˚C or below Immersion time should be 3 minutes or less
The impact on the device varies depending on the size of the cleaning bath, ultrasonic output, cleaning time,
size of PCB and mounting method of the device.
Therefore, please make sure the device withstands the ultrasonic cleaning in actual conditions in advance of
mass production.
Ethyl alcohol, Methyl alcohol and Isopropyl alcohol
In case the other type of solvent materials are intended to be used, please make sure they work fine in ac-
tual using conditions since some materials may erode the packaging resin.
This product shall not contain the following materials.
And they are not used in the production process for this product.
Regulation substances : CFCs, Halon, Carbon tetrachloride, 1.1.1-Trichloroethane (Methylchloroform)
Specific brominated flame retardants such as the PBBOs and PBBs are not used in this product at all.
This product shall not contain the following materials banned in the RoHS Directive (2002/95/EC).
•Lead, Mercury, Cadmium, Hexavalent chromium, Polybrominated biphenyls (PBB), Polybrominated di-
phenyl ethers (PBDE).
11
PC410L0NIP0F Series
Sheet No.: D2-A04802EN