SFH610A-4 Vishay, SFH610A-4 Datasheet - Page 9

• Manufacturer Part Number: SFH610A-4
• Description: OPTOCOUPLER PHOTOTRANS 320% 4DIP
• Manufacturer: Vishay

Specifications of SFH610A-4

• Mounting Type: Through Hole
• Isolation Voltage: 5300 Vrms
• Number Of Channels: 1
• Input Type: DC
• Voltage - Isolation: 5300Vrms
• Current Transfer Ratio (min): 56% @ 1mA
• Current Transfer Ratio (max): 320% @ 10mA
• Voltage - Output: 70V
• Current - Output / Channel: 50mA
• Current - Dc Forward (if): 60mA
• Vce Saturation (max): 400mV
• Output Type: Transistor
• Package / Case: 4-DIP (0.300", 7.62mm)
• Forward Current: 60 mA
• Maximum Input Diode Current: 60 mA
• Maximum Reverse Diode Voltage: 6 V
• Output Device: Transistor
• Configuration: 1
• Maximum Collector Emitter Voltage: 70 V
• Maximum Collector Emitter Saturation Voltage: 400 mV
• Current Transfer Ratio: 320 %
• Maximum Forward Diode Voltage: 1.65 V
• Maximum Collector Current: 100 mA
• Maximum Power Dissipation: 150 mW
• Maximum Operating Temperature: + 100 C
• Minimum Operating Temperature: - 55 C
• No. Of Channels: 1
• Optocoupler Output Type: Phototransistor
• Input Current: 60mA
• Output Voltage: 70V
• Opto Case Style: DIP
• No. Of Pins: 4
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: 751-1344-5; SFH610A-4GI; SFH610A-4GI

OZONE DEPLETING SUBSTANCES POLICY STATEMENT
It is the policy of Vishay Semiconductor GmbH to
1. Meet all present and future national and international statutory requirements.
2. Regularly and continuously improve the performance of our products, processes, distribution and operating systems with
It is particular concern to control or eliminate releases of those substances into the atmosphere which are known as ozone
depleting substances (ODSs).
The Montreal Protocol (1987) and its London Amendments (1990) intend to severely restrict the use of ODSs and forbid their use
within the next ten years. Various national and international initiatives are pressing for an earlier ban on these substances.
Vishay Semiconductor GmbH has been able to use its policy of continuous improvements to eliminate the use of ODSs listed in
the following documents.
1. Annex A, B and list of transitional substances of the Montreal Protocol and the London Amendments respectively.
2. Class I and II ozone depleting substances in the Clean Air Act Amendments of 1990 by the Environmental Protection Agency
3. Council Decision 88/540/EEC and 91/690/EEC Annex A, B and C (transitional substances) respectively.
Vishay Semiconductor GmbH can certify that our semiconductors are not manufactured with ozone depleting substances and do
not contain such substances.
customer. Should the buyer use Vishay Semiconductors products for any unintended or unauthorized application, the buyer shall
Document Number: 83666
Rev. 2.0, 10-Dec-08
Parameters can vary in different applications. All operating parameters must be validated for each customer application by the
indemnify Vishay Semiconductors against all claims, costs, damages, and expenses, arising out of, directly or indirectly, any
respect to their impact on the health and safety of our employees and the public, as well as their impact on the environment.
(EPA) in the USA.
claim of personal damage, injury or death associated with such unintended or unauthorized use.
Vishay Semiconductor GmbH, P.O.B. 3535, D-74025 Heilbronn, Germany
We reserve the right to make changes to improve technical design
For technical questions, contact: [e-mail]
Optocoupler, Phototransistor Output,
High Reliability, 5300 V
and may do so without further notice.
RMS
SFH610A, SFH6106
Vishay Semiconductors
www.vishay.com
615