LQ104S1DG21 Sharp Microelectronics, LQ104S1DG21 Datasheet - Page 5

• Manufacturer Part Number: LQ104S1DG21
• Description: LCD TFT 10.4" 800X600 SVGA
• Manufacturer: Sharp Microelectronics

Specifications of LQ104S1DG21

• Display Type: LCD - Color
• Display Mode: *
• Viewing Area: 211.20mm L x 158.40mm W
• Dot Pixels: 800 x 600 (SVGA)
• Pixel Density: 800 x 600
• Module Size (w X H X T): 246.5 mm x 179.4 mm x 15.5 mm
• Backlighting: White
• Diagonal: 10.4 in
• Viewing Area (w X H): 211.2 mm x 158.4 mm
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Interface: -
• Backlight: -
• Dot Size: -
• Dot Pitch: -
• Lead Free Status / Rohs Status: Details
• Other names: 425-2472

1. Application
2. Overview
The device listed in these specifications sheets was designed and manufactured for use in general electronic
In case of using the device for applications such as control and safety equipment for transportation(aircraft,
Do not use the device for equipment that requires an extreme level of reliability, such as aerospace
SHARP assumes no responsibility for any damage resulting from the use of the device which does not
Contact and consult with a SHARP sales representative for any questions about this device .
module.)
materials protected under copyright of SHARP. Do not reproduce or cause any third party to reproduce them
in any form or by any means, electronic or mechanical, for any purpose, in whole or in part, without the
express written permission of SHARP .
equipment.
trains, automobiles, etc. ), rescue and security equipment and various safety related equipment which require
higher reliability and safety, take into consideration that appropriate measures such as fail-safe functions and
redundant system design should be taken .
applications, telecommunication equipment(trunk lines), nuclear power control equipment and medical or
other equipment for life support .
comply with the instructions and the precautions specified in these specifications sheets .
These specifications sheets are the proprietary product of SHARP CORPORATION(”SHARP) and include
(Thin Film Transistor). It is composed of a color TFT-LCD panel, driver ICs, control
circuit and power supply circuit and a backlight unit. Graphics and texts can be
displayed on a 800 3 600 dots panel with 262,144 colors by supplying 18 bit data signal
(6bit/color), four timing signals, +3.3V or +5V DC supply voltage for TFT-LCD panel driving and
supply voltage for backlight.
type. Therefore, this module is also suitable for the multimedia use.
(This specification is only applied for the module which has letter "A" at the end of the lot number of the
This specifications applies to color TFT-LCD module, LQ104S1DG21.
The TFT-LCD panel used for this module is a low-reflection and higher-color-saturation
Optimum viewing direction is 6 o'clock.
This module is a color active matrix LCD module incorporating amorphous silicon TFT
Backlight-driving DC/AC inverter is not built in this module.