M0216MD-162MDBR2-J Newhaven Display, M0216MD-162MDBR2-J Datasheet - Page 7

• Manufacturer Part Number: M0216MD-162MDBR2-J
• Description: MODULE VF CHAR 2X16 9.22MM
• Manufacturer: Newhaven Display

Specifications of M0216MD-162MDBR2-J

• Outline L X W X H: 122.00mm x 44.00mm x 20.00mm
• Display Format: 16 x 2
• Display Type: Character
• Format: 5 x 7 Dots
• Voltage - Supply: 5V
• Character Size: 9.20mm H x 3.80mm W
• Operating Temperature: -20°C ~ 70°C
• Product: Character Display Modules
• Character Count X Line: 16 x 2
• Module Size (w X H X T): 122 mm x 44 mm x 20 mm
• Voltage Rating: 5 V
• Operating Temperature Range: - 20 C to + 70 C
• Dot Format: 5 x 7
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Interface: -
• Viewing Area: -
• Number Of Dots: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

4.8.8 Mechanical Drawing
1.
1.1 Registers in VFD Controller
The VFD controller has two 8‐bit registers, an instruction register (IR) and a data register (DR). IR stores
instruction codes, such as display clear and cursor shift, and address information for DD‐RAM and CG‐RAM. The
IR can only be written from the host MPU. DR temporarily stores data to be written into DD‐RAM or CG‐RAM
and temporarily stores data to be read from DD‐RAM or CG‐RAM by an internal operation. The DR is also used
for data storage when reading data from DD‐RAM or CG‐RAM. When address information is written into the IR,
data is read and then stored into the DR from DD‐RAM or CG‐RAM by internal operation. Data transfer between
MPU is then completed when the MPU reads the DR. After the read, data in DD‐RAM or CG‐RAM at the next
address is sent to the DFR for the next read from the MPU. By the register selector (RS) signal, these two
registers can be selected (See Table 8).
FUNCTION DESCRIPTIONS
Fig 5
[7]