ATH010A0X3Z Lineage Power, ATH010A0X3Z Datasheet - Page 16

• Manufacturer Part Number: ATH010A0X3Z
• Description: CONVE DC/DC 0.75 3.63V @ 10A SIP
• Manufacturer: Lineage Power
• Series: Austin Lynx™ IIr
• Type: Point of Load (POL) Non-Isolated with Remote On/Offr

Specifications of ATH010A0X3Z

• Output: 0.75 ~ 3.63V
• Number Of Outputs: 1
• Power (watts): 36W
• Mounting Type: Through Hole
• Voltage - Input: 2.4 ~ 5.5V
• Package / Case: 11-SIP Module
• 1st Output: 0.75 ~ 3.63 VDC @ 10A
• Size / Dimension: 2.00" L x 0.32" W x 0.50" H (50.8mm x 8.1mm x 12.7mm)
• Power (watts) - Rated: 36W
• Operating Temperature: -40°C ~ 85°C
• Efficiency: 95%
• Approvals: CSA, EN, UL, VDE
• Output Power: 36 W
• Input Voltage Range: 2.4 V to 5.5 V
• Output Voltage (channel 1): 0.75 V to 3.63 V
• Output Current (channel 1): 10 A
• Package / Case Size: SMD
• Output Type: Non-Isolated
• Output Voltage: 0.75 V to 3.63 V
• Product: Non-Isolated / POL
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• 3rd Output: -
• 2nd Output: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 555-1083; CC109104733

Data Sheet
October 2, 2009
Post solder Cleaning and Drying
Considerations
Post solder cleaning is usually the final circuit-board
assembly process prior to electrical board testing. The
result of inadequate cleaning and drying can affect both
the reliability of a power module and the testability of the
finished circuit-board assembly. For guidance on
appropriate soldering, cleaning and drying procedures,
refer to Board Mounted Power Modules: Soldering and
Cleaning Application Note.
Through-Hole Lead-Free Soldering
Information
The RoHS-compliant through-hole products use the
SAC (Sn/Ag/Cu) Pb-free solder and RoHS-compliant
components. They are designed to be processed
through single or dual wave soldering machines. The
pins have an RoHS-compliant finish that is compatible
with both Pb and Pb-free wave soldering processes. A
maximum preheat rate of 3°C/s is suggested. The wave
preheat process should be such that the temperature of
the power module board is kept below 210°C. For Pb
solder, the recommended pot temperature is 260°C,
while the Pb-free solder pot is 270°C max. Not all
RoHS-compliant through-hole products can be
processed with paste-through-hole Pb or Pb-free reflow
process. If additional information is needed, please
consult with your Lineage Power technical
representative for more details.
LINEAGE
POWER
2.4 – 5.5Vdc input; 0.75Vdc to 3.63Vdc Output; 10A output current
Austin Lynx
TM
II SIP Non-isolated Power Modules:
16