HS1650ECN61H Renesas Electronics America, HS1650ECN61H Datasheet - Page 15

• Manufacturer Part Number: HS1650ECN61H
• Description: PCB ADAPTER 120TQFP
• Manufacturer: Renesas Electronics America

Specifications of HS1650ECN61H

• Accessory Type: User Interface Cable
• For Use With/related Products: H8SX/1650
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

2.1.3
After checking the location of pin 1 on the user system interface board and pin 1 on the IC socket
connector, align the guide pins on the IC socket connector with the guide holes on the user system
interface board, and insert the IC socket connector into the IC socket (figure 2).
2.1.4
Fasten the user system interface board to the IC socket on the user system with four screws (M2
mm) provided.
Take special care, such as manually securing the IC socket soldered area, to prevent the soldered IC
socket from being damaged by twisting the components.
4
1. Use the screwdriver provided for tightening screws.
2. The tightening torque must be 0.294 N•m or less.
3. If the emulator does not operate correctly, cracks might
Installing IC Socket
Check the location of pin 1 before inserting.
Fastening IC Socket Connector
If the applied torque cannot be accurately measured,
stop tightening when the force required to turn the screw
becomes significantly greater than that needed when first
tightening. If a screw is tightened too much, the screw
head may break or an IC socket contact error may be
caused by a crack in the IC socket solder.
have occurred in the solder. Check conduction with
a tester and re-solder the IC socket if necessary.
CAUTION
CAUTION
x
12