HS2238ECN61H Renesas Electronics America, HS2238ECN61H Datasheet - Page 17

• Manufacturer Part Number: HS2238ECN61H
• Description: DEV EMULATOR PCB ADAPTOR TPF-100
• Manufacturer: Renesas Electronics America

Specifications of HS2238ECN61H

• Accessory Type: User Interface Cable
• For Use With/related Products: H8S/2238
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

2.2.2
Align pin 1 on the IC socket for a TFP-100G package on the user system with pin 1 on the user
system interface cable head, and insert the user system interface cable head into the IC socket on the
user system, as shown in figure 4.
2.2.3
6
1. Check the location of pin 1 before inserting.
2. Use the screwdriver provided for tightening screws.
3. The tightening torque must be 0.054 N•m or less.
4. If the MCU does not operate correctly, cracks might have
Inserting Cable Head
Check the location of pin 1 before inserting.
Fastening Cable Head
If the applied torque cannot be accurately measured,
stop tightening when the force required to turn the screw
becomes significantly greater than that needed when first
tightening. If a screw is tightened too much, the screw
head may break or an IC socket contact error may be
caused by a crack in the IC socket solder.
occurred in the solder. Check conduction with a tester
and re-solder the IC socket if necessary.
CA
CAUTION
UTION