HS2282ECF61H Renesas Electronics America, HS2282ECF61H Datasheet - Page 21

• Manufacturer Part Number: HS2282ECF61H
• Description: DEV EMULATOR PCB ADAPTOR 100-QFP
• Manufacturer: Renesas Electronics America

Specifications of HS2282ECF61H

• Accessory Type: User Interface Cable
• For Use With/related Products: H8S/2282
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

2.2.4
6
1. Use a Phillips-type screwdriver whose head matches
2. The tightening torque must be 0.098 N•m or less.
3. If the emulator does not operate correctly, cracks might
Fastening Cable Head
the screw head.
If the applied torque cannot be accurately measured,
stop tightening when the force required to turn the screw
becomes significantly greater than that needed when first
tightening. If a screw is tightened too much, the screw
head may break or an IC socket contact error may be
caused by a crack in the IC socket solder.
have occurred in the solder. Check conduction with
a tester and re-solder the IC socket if necessary.
CAUTION