101-1218 Rabbit Semiconductor, 101-1218 Datasheet - Page 58

• Manufacturer Part Number: 101-1218
• Description: KIT APPLCTN RABBITCORE RCM4010
• Manufacturer: Rabbit Semiconductor
• Series: RabbitCore®r

Specifications of 101-1218

• Main Purpose: *
• Embedded: *
• Utilized Ic / Part: RCM4010
• Primary Attributes: *
• Secondary Attributes: *
• Processor To Be Evaluated: Rabbit 4000
• Interface Type: Ethernet
• Operating Supply Voltage: 12 V
• Lead Free Status / RoHS Status: Not applicable / Not applicable
• Other names: 316-1156

PARAMETERS
RETURN VALUE
SEE ALSO
52
instructionbyte the instruction byte that will initiate a read or write operation
cmd
brate
0 on write operations
data value on read operations
anaInDriver, anaIn, brdInit
anaInConfig (continued)
at 8 or 16 bits on the designated register address. For example,
the command data that configure the registers addressed by the in-
struction byte. Enter 0 if you are performing a read operation. For
example,
the serial clock transfer rate of 9600 to 115,200 bytes per second.
brate must be set the first time this function is called. Enter 0 for
this parameter thereafter, for example,
checkid = anaInConfig(0x5F, 0, 9600);
i = anaInConfig(0x07, 0x3b, 0);
anaInConfig(0x00, 0x00, 9600);
// read ID and set baud rate
// write ref/osc reg and enable
// resets device and sets byte rate
RabbitCore RCM4000