101-1218 Rabbit Semiconductor, 101-1218 Datasheet - Page 8

• Manufacturer Part Number: 101-1218
• Description: KIT APPLCTN RABBITCORE RCM4010
• Manufacturer: Rabbit Semiconductor
• Series: RabbitCore®r

Specifications of 101-1218

• Main Purpose: *
• Embedded: *
• Utilized Ic / Part: RCM4010
• Primary Attributes: *
• Secondary Attributes: *
• Processor To Be Evaluated: Rabbit 4000
• Interface Type: Ethernet
• Operating Supply Voltage: 12 V
• Lead Free Status / RoHS Status: Not applicable / Not applicable
• Other names: 316-1156

1.1 RCM4000 Features
• Small size: 1.84" × 2.42" × 0.77" (47 mm × 61 mm × 20 mm)
• Microprocessor: Rabbit 4000 running at 58.98 MHz
• Up to 29 general-purpose I/O lines configurable with up to four alternate functions
• 3.3 V I/O lines with low-power modes down to 2 kHz
• Up to five CMOS-compatible serial ports — four ports are configurable as a clocked
• Combinations of up to eight single-ended or four differential 12-bit analog inputs
• Alternate I/O bus can be configured for 8 data lines and 6 address lines (shared with
• 512KB or 1MB flash memory, 512KB or 1 MB SRAM, with a fixed mass-storage
• Real-time clock
• Watchdog supervisor
There are three RCM4000 production models. Table 1 summarizes their main features.
2
Microprocessor
SRAM
Flash Memory (program)
Flash Memory
(mass data storage)
A/D Converter
Serial Ports
serial ports (SPI), and one port is configurable as an SDLC/HDLC serial port.
(RCM4000 only)
parallel I/O lines), I/O read/write
flash-memory option that may be used with the standardized directory structure sup-
ported by the Dynamic C FAT File System module
Feature
•
•
•
4 shared high-speed,
CMOS-compatible ports:
32 MB (NAND flash)
all 4 configurable as
asynchronous (with
IrDA) or as clocked
serial (SPI)
1 asynchronous
clocked serial port
shared with program-
ming port
1 clocked serial port
shared with A/D con-
verter
RCM4000
Table 1. RCM4000 Features
12 bits
512KB
512KB
Rabbit
•
•
5 shared high-speed,
CMOS-compatible ports:
all 5 configurable as
asynchronous (with
IrDA), 4 as clocked
serial (SPI), and 1 as
SDLC/HDLC
1 asynchronous
clocked serial port
shared with program-
ming port
®
RCM4010
4000 at 58.98 MHz
—
—
•
•
4 shared high-speed,
CMOS-compatible ports:
32 MB (NAND flash)
all 4 configurable as
asynchronous (with
IrDA) or as clocked
serial (SPI)
1 asynchronous
clocked serial port
shared with program-
ming port
RabbitCore RCM4000
RCM4050
1MB
1MB
—